---
type: "drill"
designation: "7/32"
series: "fractional"
series_name: "Fractional Drill Sizes"
diameter_in: 0.21875
diameter_mm: 5.55625
fraction_label: "7/32"
standard: "ANSI/ASME B94.11M; BS 328"
verified: "August 1, 2026"
url: https://shopmath.org/drills/fractional/7-32
---

# 7/32 Drill Bit Size — 0.2188 in / 5.556 mm

A 7/32 drill bit is 0.2188 in (5.556 mm) in diameter. It belongs to the fractional series of standard twist drills. It is the recommended tap drill for 1/4"-32 UNEF.

- **Designation**: 7/32
- **Series**: Fractional
- **Diameter**: 0.2188 in (5.556 mm)
- **Fraction**: 7/32

## 7/32 Drill Diameter

| Property | Value |
| --- | --- |
| Designation | 7/32 |
| Series | Fractional |
| Diameter (in) | 0.2188 |
| Diameter (mm) | 5.556 |
| Fractional call-out | 7/32 |

## 7/32 Drill Equivalents in the Other Size Series

The nearest standard drill to 7/32 in each of the other three series. Nothing here is an exact match unless the difference column reads 0.0000 in.

| Series | Nearest drill | Diameter (in) | Diameter (mm) | Difference |
| --- | --- | --- | --- | --- |
| Number | [#2](https://shopmath.org/drills/number/2.md) | 0.2210 | 5.613 | +0.0023 in |
| Letter | [A](https://shopmath.org/drills/letter/a.md) | 0.2340 | 5.944 | +0.0153 in |
| Metric | [5.6 mm](https://shopmath.org/drills/metric/5-6mm.md) | 0.2205 | 5.600 | +0.0017 in |

## Threads Tapped With a 7/32 Drill

| Thread | Pitch | Thread engagement (%) |
| --- | --- | --- |
| [1/4"-32 UNEF](https://shopmath.org/threads/unef/1-4-32.md) | 32 TPI | 77.0 |

_Engagement is what the real drill leaves with a cut tap, not the requested target._

## Sources and Method for the 7/32 Drill Size

### Drill index

- **Source**: Number/letter: bd_warehouse drill_sizes.csv (Apache-2.0) cross-checked against Wikipedia Drill bit sizes (CC BY-SA 4.0). Fractional: computed 1/64 in steps per ANSI B94.11M. Metric: computed BS 328 increment pattern.
- **Method**: computed
- **Verified against**: Wikipedia Drill bit sizes (CC BY-SA 4.0); 31/31 checks passed

### Assumptions

- Drill diameters are nominal. A worn or run-out drill cuts oversize; measure the hole, not the shank, when the fit matters.
- Dataset scope: Number sizes #61-#80 are stored but tagged demandTier 'extended' — query-space-map.md Appendix A found the tail thinning in the 60s. Sizes below #80 and metric sizes above 25.0 mm excluded.

**Data last verified**: August 1, 2026

## Common Questions About the 7/32 Drill Bit

### What size is a 7/32 drill bit size?

A 7/32 drill bit is 0.2188 in (5.556 mm) in diameter. The nearest fractional call-out is 7/32.

### What is the metric equivalent of a 7/32 drill bit?

The closest metric drill to 7/32 (0.2188 in (5.556 mm)) is 5.6 mm at 0.2205 in (5.600 mm) — a difference of 0.0017 in.

### What thread does a 7/32 drill bit tap?

A 7/32 drill is the recommended tap drill for 1/4"-32 UNEF. That leaves the thread engagement shown in the table above with a cut tap.

## Related pages

- Next size down (any series): [5.5 mm](https://shopmath.org/drills/metric/5-5mm.md) — 0.2165 in (5.500 mm)
- Next size up (any series): [5.6 mm](https://shopmath.org/drills/metric/5-6mm.md) — 0.2205 in (5.600 mm)
- Previous in the fractional series: [13/64](https://shopmath.org/drills/fractional/13-64.md)
- Next in the fractional series: [15/64](https://shopmath.org/drills/fractional/15-64.md)
- All fractional sizes: [Fractional drill sizes](https://shopmath.org/drills/fractional.md)
- All drill sizes: [Drill bit size reference](https://shopmath.org/drills.md)
- Complete index by diameter: [Drill size chart](https://shopmath.org/charts/drill-sizes.md)
- Tap drills by thread: [Tap drill chart](https://shopmath.org/charts/tap-drill.md)

---

*Source: [ShopMath](https://shopmath.org/drills/fractional/7-32) — data verified August 1, 2026. Reference data; verify against the governing standard before manufacture.*