---
type: "drill"
designation: "C"
series: "letter"
series_name: "Letter Drill Sizes"
diameter_in: 0.242
diameter_mm: 6.1468
standard: "ANSI/ASME B94.11M; BS 328"
verified: "August 1, 2026"
url: https://shopmath.org/drills/letter/c
---

# C Drill Bit Size — 0.2420 in / 6.147 mm

A C drill bit is 0.2420 in (6.147 mm) in diameter. It belongs to the letter series of standard twist drills.

- **Designation**: C
- **Series**: Letter
- **Diameter**: 0.2420 in (6.147 mm)

## C Drill Diameter

| Property | Value |
| --- | --- |
| Designation | C |
| Series | Letter |
| Diameter (in) | 0.2420 |
| Diameter (mm) | 6.147 |

## C Drill Equivalents in the Other Size Series

The nearest standard drill to C in each of the other three series. Nothing here is an exact match unless the difference column reads 0.0000 in.

| Series | Nearest drill | Diameter (in) | Diameter (mm) | Difference |
| --- | --- | --- | --- | --- |
| Number | [#1](https://shopmath.org/drills/number/1.md) | 0.2280 | 5.791 | -0.0140 in |
| Fractional | [15/64](https://shopmath.org/drills/fractional/15-64.md) | 0.2344 | 5.953 | -0.0076 in |
| Metric | [6.1 mm](https://shopmath.org/drills/metric/6-1mm.md) | 0.2402 | 6.100 | -0.0018 in |

## Sources and Method for the C Drill Size

### Drill index

- **Source**: Number/letter: bd_warehouse drill_sizes.csv (Apache-2.0) cross-checked against Wikipedia Drill bit sizes (CC BY-SA 4.0). Fractional: computed 1/64 in steps per ANSI B94.11M. Metric: computed BS 328 increment pattern.
- **Method**: compiled
- **Verified against**: Wikipedia Drill bit sizes (CC BY-SA 4.0); 31/31 checks passed

### Assumptions

- Drill diameters are nominal. A worn or run-out drill cuts oversize; measure the hole, not the shank, when the fit matters.
- Dataset scope: Number sizes #61-#80 are stored but tagged demandTier 'extended' — query-space-map.md Appendix A found the tail thinning in the 60s. Sizes below #80 and metric sizes above 25.0 mm excluded.

**Data last verified**: August 1, 2026

## Common Questions About the C Drill Bit

### What size is a C drill bit size?

A C drill bit is 0.2420 in (6.147 mm) in diameter.

### What is the metric equivalent of a C drill bit?

The closest metric drill to C (0.2420 in (6.147 mm)) is 6.1 mm at 0.2402 in (6.100 mm) — a difference of 0.0018 in.

### What fraction is a C drill bit?

C is 0.2420 in (6.147 mm), which is not itself a fractional size. The closest fractional drill is 15/64 at 0.2344 in (5.953 mm).

## Related pages

- Next size down (any series): [6.1 mm](https://shopmath.org/drills/metric/6-1mm.md) — 0.2402 in (6.100 mm)
- Next size up (any series): [6.2 mm](https://shopmath.org/drills/metric/6-2mm.md) — 0.2441 in (6.200 mm)
- Previous in the letter series: [B](https://shopmath.org/drills/letter/b.md)
- Next in the letter series: [D](https://shopmath.org/drills/letter/d.md)
- All letter sizes: [Letter drill sizes](https://shopmath.org/drills/letter.md)
- All drill sizes: [Drill bit size reference](https://shopmath.org/drills.md)
- Complete index by diameter: [Drill size chart](https://shopmath.org/charts/drill-sizes.md)
- Tap drills by thread: [Tap drill chart](https://shopmath.org/charts/tap-drill.md)

---

*Source: [ShopMath](https://shopmath.org/drills/letter/c) — data verified August 1, 2026. Reference data; verify against the governing standard before manufacture.*