---
type: "drill"
designation: "L"
series: "letter"
series_name: "Letter Drill Sizes"
diameter_in: 0.29
diameter_mm: 7.366
standard: "ANSI/ASME B94.11M; BS 328"
verified: "August 1, 2026"
url: https://shopmath.org/drills/letter/l
---

# L Drill Bit Size — 0.2900 in / 7.366 mm

A L drill bit is 0.2900 in (7.366 mm) in diameter. It belongs to the letter series of standard twist drills.

- **Designation**: L
- **Series**: Letter
- **Diameter**: 0.2900 in (7.366 mm)

## L Drill Diameter

| Property | Value |
| --- | --- |
| Designation | L |
| Series | Letter |
| Diameter (in) | 0.2900 |
| Diameter (mm) | 7.366 |

## L Drill Equivalents in the Other Size Series

The nearest standard drill to L in each of the other three series. Nothing here is an exact match unless the difference column reads 0.0000 in.

| Series | Nearest drill | Diameter (in) | Diameter (mm) | Difference |
| --- | --- | --- | --- | --- |
| Number | [#1](https://shopmath.org/drills/number/1.md) | 0.2280 | 5.791 | -0.0620 in |
| Fractional | [19/64](https://shopmath.org/drills/fractional/19-64.md) | 0.2969 | 7.541 | +0.0069 in |
| Metric | [7.4 mm](https://shopmath.org/drills/metric/7-4mm.md) | 0.2913 | 7.400 | +0.0013 in |

## Sources and Method for the L Drill Size

### Drill index

- **Source**: Number/letter: bd_warehouse drill_sizes.csv (Apache-2.0) cross-checked against Wikipedia Drill bit sizes (CC BY-SA 4.0). Fractional: computed 1/64 in steps per ANSI B94.11M. Metric: computed BS 328 increment pattern.
- **Method**: compiled
- **Verified against**: Wikipedia Drill bit sizes (CC BY-SA 4.0); 31/31 checks passed

### Assumptions

- Drill diameters are nominal. A worn or run-out drill cuts oversize; measure the hole, not the shank, when the fit matters.
- Dataset scope: Number sizes #61-#80 are stored but tagged demandTier 'extended' — query-space-map.md Appendix A found the tail thinning in the 60s. Sizes below #80 and metric sizes above 25.0 mm excluded.

**Data last verified**: August 1, 2026

## Common Questions About the L Drill Bit

### What size is a L drill bit size?

A L drill bit is 0.2900 in (7.366 mm) in diameter.

### What is the metric equivalent of a L drill bit?

The closest metric drill to L (0.2900 in (7.366 mm)) is 7.4 mm at 0.2913 in (7.400 mm) — a difference of 0.0013 in.

### What fraction is a L drill bit?

L is 0.2900 in (7.366 mm), which is not itself a fractional size. The closest fractional drill is 19/64 at 0.2969 in (7.541 mm).

## Related pages

- Next size down (any series): [7.3 mm](https://shopmath.org/drills/metric/7-3mm.md) — 0.2874 in (7.300 mm)
- Next size up (any series): [7.4 mm](https://shopmath.org/drills/metric/7-4mm.md) — 0.2913 in (7.400 mm)
- Previous in the letter series: [K](https://shopmath.org/drills/letter/k.md)
- Next in the letter series: [M](https://shopmath.org/drills/letter/m.md)
- All letter sizes: [Letter drill sizes](https://shopmath.org/drills/letter.md)
- All drill sizes: [Drill bit size reference](https://shopmath.org/drills.md)
- Complete index by diameter: [Drill size chart](https://shopmath.org/charts/drill-sizes.md)
- Tap drills by thread: [Tap drill chart](https://shopmath.org/charts/tap-drill.md)

---

*Source: [ShopMath](https://shopmath.org/drills/letter/l) — data verified August 1, 2026. Reference data; verify against the governing standard before manufacture.*