---
type: "drill"
designation: "24.25 mm"
series: "metric"
series_name: "Metric Drill Sizes"
diameter_in: 0.954724
diameter_mm: 24.25
standard: "ANSI/ASME B94.11M; BS 328"
verified: "August 1, 2026"
url: https://shopmath.org/drills/metric/24-25mm
---

# 24.25 mm Drill Bit Size — 0.9547 in / 24.250 mm

A 24.25 mm drill bit is 0.9547 in (24.250 mm) in diameter. It belongs to the metric series of standard twist drills.

- **Designation**: 24.25 mm
- **Series**: Metric
- **Diameter**: 0.9547 in (24.250 mm)

## 24.25 mm Drill Diameter

| Property | Value |
| --- | --- |
| Designation | 24.25 mm |
| Series | Metric |
| Diameter (in) | 0.9547 |
| Diameter (mm) | 24.250 |

## 24.25 mm Drill Equivalents in the Other Size Series

The nearest standard drill to 24.25 mm in each of the other three series. Nothing here is an exact match unless the difference column reads 0.0000 in.

| Series | Nearest drill | Diameter (in) | Diameter (mm) | Difference |
| --- | --- | --- | --- | --- |
| Number | [#1](https://shopmath.org/drills/number/1.md) | 0.2280 | 5.791 | -0.7267 in |
| Letter | [Z](https://shopmath.org/drills/letter/z.md) | 0.4130 | 10.490 | -0.5417 in |
| Fractional | [61/64](https://shopmath.org/drills/fractional/61-64.md) | 0.9531 | 24.209 | -0.0016 in |

## Sources and Method for the 24.25 mm Drill Size

### Drill index

- **Source**: Number/letter: bd_warehouse drill_sizes.csv (Apache-2.0) cross-checked against Wikipedia Drill bit sizes (CC BY-SA 4.0). Fractional: computed 1/64 in steps per ANSI B94.11M. Metric: computed BS 328 increment pattern.
- **Method**: computed
- **Verified against**: Wikipedia Drill bit sizes (CC BY-SA 4.0); 31/31 checks passed

### Assumptions

- Drill diameters are nominal. A worn or run-out drill cuts oversize; measure the hole, not the shank, when the fit matters.
- Dataset scope: Number sizes #61-#80 are stored but tagged demandTier 'extended' — query-space-map.md Appendix A found the tail thinning in the 60s. Sizes below #80 and metric sizes above 25.0 mm excluded.

**Data last verified**: August 1, 2026

## Common Questions About the 24.25 mm Drill Bit

### What size is a 24.25 mm drill bit size?

A 24.25 mm drill bit is 0.9547 in (24.250 mm) in diameter.

### What fraction is a 24.25 mm drill bit?

24.25 mm is 0.9547 in (24.250 mm), which is not itself a fractional size. The closest fractional drill is 61/64 at 0.9531 in (24.209 mm).

## Related pages

- Next size down (any series): [61/64](https://shopmath.org/drills/fractional/61-64.md) — 0.9531 in (24.209 mm)
- Next size up (any series): [24.5 mm](https://shopmath.org/drills/metric/24-5mm.md) — 0.9646 in (24.500 mm)
- Previous in the metric series: [24 mm](https://shopmath.org/drills/metric/24mm.md)
- Next in the metric series: [24.5 mm](https://shopmath.org/drills/metric/24-5mm.md)
- All metric sizes: [Metric drill sizes](https://shopmath.org/drills/metric.md)
- All drill sizes: [Drill bit size reference](https://shopmath.org/drills.md)
- Complete index by diameter: [Drill size chart](https://shopmath.org/charts/drill-sizes.md)
- Tap drills by thread: [Tap drill chart](https://shopmath.org/charts/tap-drill.md)

---

*Source: [ShopMath](https://shopmath.org/drills/metric/24-25mm) — data verified August 1, 2026. Reference data; verify against the governing standard before manufacture.*