---
type: "drill"
designation: "2 mm"
series: "metric"
series_name: "Metric Drill Sizes"
diameter_in: 0.07874
diameter_mm: 2
standard: "ANSI/ASME B94.11M; BS 328"
verified: "August 1, 2026"
url: https://shopmath.org/drills/metric/2mm
---

# 2 mm Drill Bit Size — 0.0787 in / 2.000 mm

A 2 mm drill bit is 0.0787 in (2.000 mm) in diameter. It belongs to the metric series of standard twist drills.

- **Designation**: 2 mm
- **Series**: Metric
- **Diameter**: 0.0787 in (2.000 mm)

## 2 mm Drill Diameter

| Property | Value |
| --- | --- |
| Designation | 2 mm |
| Series | Metric |
| Diameter (in) | 0.0787 |
| Diameter (mm) | 2.000 |

## 2 mm Drill Equivalents in the Other Size Series

The nearest standard drill to 2 mm in each of the other three series. Nothing here is an exact match unless the difference column reads 0.0000 in.

| Series | Nearest drill | Diameter (in) | Diameter (mm) | Difference |
| --- | --- | --- | --- | --- |
| Number | [#47](https://shopmath.org/drills/number/47.md) | 0.0785 | 1.994 | -0.0002 in |
| Letter | [A](https://shopmath.org/drills/letter/a.md) | 0.2340 | 5.944 | +0.1553 in |
| Fractional | [5/64](https://shopmath.org/drills/fractional/5-64.md) | 0.0781 | 1.984 | -0.0006 in |

## Sources and Method for the 2 mm Drill Size

### Drill index

- **Source**: Number/letter: bd_warehouse drill_sizes.csv (Apache-2.0) cross-checked against Wikipedia Drill bit sizes (CC BY-SA 4.0). Fractional: computed 1/64 in steps per ANSI B94.11M. Metric: computed BS 328 increment pattern.
- **Method**: computed
- **Verified against**: Wikipedia Drill bit sizes (CC BY-SA 4.0); 31/31 checks passed

### Assumptions

- Drill diameters are nominal. A worn or run-out drill cuts oversize; measure the hole, not the shank, when the fit matters.
- Dataset scope: Number sizes #61-#80 are stored but tagged demandTier 'extended' — query-space-map.md Appendix A found the tail thinning in the 60s. Sizes below #80 and metric sizes above 25.0 mm excluded.

**Data last verified**: August 1, 2026

## Common Questions About the 2 mm Drill Bit

### What size is a 2 mm drill bit size?

A 2 mm drill bit is 0.0787 in (2.000 mm) in diameter.

### What fraction is a 2 mm drill bit?

2 mm is 0.0787 in (2.000 mm), which is not itself a fractional size. The closest fractional drill is 5/64 at 0.0781 in (1.984 mm).

## Related pages

- Next size down (any series): [#47](https://shopmath.org/drills/number/47.md) — 0.0785 in (1.994 mm)
- Next size up (any series): [2.05 mm](https://shopmath.org/drills/metric/2-05mm.md) — 0.0807 in (2.050 mm)
- Previous in the metric series: [1.95 mm](https://shopmath.org/drills/metric/1-95mm.md)
- Next in the metric series: [2.05 mm](https://shopmath.org/drills/metric/2-05mm.md)
- All metric sizes: [Metric drill sizes](https://shopmath.org/drills/metric.md)
- All drill sizes: [Drill bit size reference](https://shopmath.org/drills.md)
- Complete index by diameter: [Drill size chart](https://shopmath.org/charts/drill-sizes.md)
- Tap drills by thread: [Tap drill chart](https://shopmath.org/charts/tap-drill.md)

---

*Source: [ShopMath](https://shopmath.org/drills/metric/2mm) — data verified August 1, 2026. Reference data; verify against the governing standard before manufacture.*