---
type: "drill"
designation: "4 mm"
series: "metric"
series_name: "Metric Drill Sizes"
diameter_in: 0.15748
diameter_mm: 4
standard: "ANSI/ASME B94.11M; BS 328"
verified: "August 1, 2026"
url: https://shopmath.org/drills/metric/4mm
---

# 4 mm Drill Bit Size — 0.1575 in / 4.000 mm

A 4 mm drill bit is 0.1575 in (4.000 mm) in diameter. It belongs to the metric series of standard twist drills.

- **Designation**: 4 mm
- **Series**: Metric
- **Diameter**: 0.1575 in (4.000 mm)

## 4 mm Drill Diameter

| Property | Value |
| --- | --- |
| Designation | 4 mm |
| Series | Metric |
| Diameter (in) | 0.1575 |
| Diameter (mm) | 4.000 |

## 4 mm Drill Equivalents in the Other Size Series

The nearest standard drill to 4 mm in each of the other three series. Nothing here is an exact match unless the difference column reads 0.0000 in.

| Series | Nearest drill | Diameter (in) | Diameter (mm) | Difference |
| --- | --- | --- | --- | --- |
| Number | [#22](https://shopmath.org/drills/number/22.md) | 0.1570 | 3.988 | -0.0005 in |
| Letter | [A](https://shopmath.org/drills/letter/a.md) | 0.2340 | 5.944 | +0.0765 in |
| Fractional | [5/32](https://shopmath.org/drills/fractional/5-32.md) | 0.1563 | 3.969 | -0.0012 in |

## Sources and Method for the 4 mm Drill Size

### Drill index

- **Source**: Number/letter: bd_warehouse drill_sizes.csv (Apache-2.0) cross-checked against Wikipedia Drill bit sizes (CC BY-SA 4.0). Fractional: computed 1/64 in steps per ANSI B94.11M. Metric: computed BS 328 increment pattern.
- **Method**: computed
- **Verified against**: Wikipedia Drill bit sizes (CC BY-SA 4.0); 31/31 checks passed

### Assumptions

- Drill diameters are nominal. A worn or run-out drill cuts oversize; measure the hole, not the shank, when the fit matters.
- Dataset scope: Number sizes #61-#80 are stored but tagged demandTier 'extended' — query-space-map.md Appendix A found the tail thinning in the 60s. Sizes below #80 and metric sizes above 25.0 mm excluded.

**Data last verified**: August 1, 2026

## Common Questions About the 4 mm Drill Bit

### What size is a 4 mm drill bit size?

A 4 mm drill bit is 0.1575 in (4.000 mm) in diameter.

### What fraction is a 4 mm drill bit?

4 mm is 0.1575 in (4.000 mm), which is not itself a fractional size. The closest fractional drill is 5/32 at 0.1563 in (3.969 mm).

## Related pages

- Next size down (any series): [#22](https://shopmath.org/drills/number/22.md) — 0.1570 in (3.988 mm)
- Next size up (any series): [#21](https://shopmath.org/drills/number/21.md) — 0.1590 in (4.039 mm)
- Previous in the metric series: [3.9 mm](https://shopmath.org/drills/metric/3-9mm.md)
- Next in the metric series: [4.1 mm](https://shopmath.org/drills/metric/4-1mm.md)
- All metric sizes: [Metric drill sizes](https://shopmath.org/drills/metric.md)
- All drill sizes: [Drill bit size reference](https://shopmath.org/drills.md)
- Complete index by diameter: [Drill size chart](https://shopmath.org/charts/drill-sizes.md)
- Tap drills by thread: [Tap drill chart](https://shopmath.org/charts/tap-drill.md)

---

*Source: [ShopMath](https://shopmath.org/drills/metric/4mm) — data verified August 1, 2026. Reference data; verify against the governing standard before manufacture.*