---
type: "drill"
designation: "5.2 mm"
series: "metric"
series_name: "Metric Drill Sizes"
diameter_in: 0.204724
diameter_mm: 5.2
standard: "ANSI/ASME B94.11M; BS 328"
verified: "August 1, 2026"
url: https://shopmath.org/drills/metric/5-2mm
---

# 5.2 mm Drill Bit Size — 0.2047 in / 5.200 mm

A 5.2 mm drill bit is 0.2047 in (5.200 mm) in diameter. It belongs to the metric series of standard twist drills.

- **Designation**: 5.2 mm
- **Series**: Metric
- **Diameter**: 0.2047 in (5.200 mm)

## 5.2 mm Drill Diameter

| Property | Value |
| --- | --- |
| Designation | 5.2 mm |
| Series | Metric |
| Diameter (in) | 0.2047 |
| Diameter (mm) | 5.200 |

## 5.2 mm Drill Equivalents in the Other Size Series

The nearest standard drill to 5.2 mm in each of the other three series. Nothing here is an exact match unless the difference column reads 0.0000 in.

| Series | Nearest drill | Diameter (in) | Diameter (mm) | Difference |
| --- | --- | --- | --- | --- |
| Number | [#6](https://shopmath.org/drills/number/6.md) | 0.2040 | 5.182 | -0.0007 in |
| Letter | [A](https://shopmath.org/drills/letter/a.md) | 0.2340 | 5.944 | +0.0293 in |
| Fractional | [13/64](https://shopmath.org/drills/fractional/13-64.md) | 0.2031 | 5.159 | -0.0016 in |

## Sources and Method for the 5.2 mm Drill Size

### Drill index

- **Source**: Number/letter: bd_warehouse drill_sizes.csv (Apache-2.0) cross-checked against Wikipedia Drill bit sizes (CC BY-SA 4.0). Fractional: computed 1/64 in steps per ANSI B94.11M. Metric: computed BS 328 increment pattern.
- **Method**: computed
- **Verified against**: Wikipedia Drill bit sizes (CC BY-SA 4.0); 31/31 checks passed

### Assumptions

- Drill diameters are nominal. A worn or run-out drill cuts oversize; measure the hole, not the shank, when the fit matters.
- Dataset scope: Number sizes #61-#80 are stored but tagged demandTier 'extended' — query-space-map.md Appendix A found the tail thinning in the 60s. Sizes below #80 and metric sizes above 25.0 mm excluded.

**Data last verified**: August 1, 2026

## Common Questions About the 5.2 mm Drill Bit

### What size is a 5.2 mm drill bit size?

A 5.2 mm drill bit is 0.2047 in (5.200 mm) in diameter.

### What fraction is a 5.2 mm drill bit?

5.2 mm is 0.2047 in (5.200 mm), which is not itself a fractional size. The closest fractional drill is 13/64 at 0.2031 in (5.159 mm).

## Related pages

- Next size down (any series): [#6](https://shopmath.org/drills/number/6.md) — 0.2040 in (5.182 mm)
- Next size up (any series): [#5](https://shopmath.org/drills/number/5.md) — 0.2055 in (5.220 mm)
- Previous in the metric series: [5.1 mm](https://shopmath.org/drills/metric/5-1mm.md)
- Next in the metric series: [5.3 mm](https://shopmath.org/drills/metric/5-3mm.md)
- All metric sizes: [Metric drill sizes](https://shopmath.org/drills/metric.md)
- All drill sizes: [Drill bit size reference](https://shopmath.org/drills.md)
- Complete index by diameter: [Drill size chart](https://shopmath.org/charts/drill-sizes.md)
- Tap drills by thread: [Tap drill chart](https://shopmath.org/charts/tap-drill.md)

---

*Source: [ShopMath](https://shopmath.org/drills/metric/5-2mm) — data verified August 1, 2026. Reference data; verify against the governing standard before manufacture.*