---
type: "drill"
designation: "6.3 mm"
series: "metric"
series_name: "Metric Drill Sizes"
diameter_in: 0.248031
diameter_mm: 6.3
standard: "ANSI/ASME B94.11M; BS 328"
verified: "August 1, 2026"
url: https://shopmath.org/drills/metric/6-3mm
---

# 6.3 mm Drill Bit Size — 0.2480 in / 6.300 mm

A 6.3 mm drill bit is 0.2480 in (6.300 mm) in diameter. It belongs to the metric series of standard twist drills. It is the recommended tap drill for M7×0.75.

- **Designation**: 6.3 mm
- **Series**: Metric
- **Diameter**: 0.2480 in (6.300 mm)

## 6.3 mm Drill Diameter

| Property | Value |
| --- | --- |
| Designation | 6.3 mm |
| Series | Metric |
| Diameter (in) | 0.2480 |
| Diameter (mm) | 6.300 |

## 6.3 mm Drill Equivalents in the Other Size Series

The nearest standard drill to 6.3 mm in each of the other three series. Nothing here is an exact match unless the difference column reads 0.0000 in.

| Series | Nearest drill | Diameter (in) | Diameter (mm) | Difference |
| --- | --- | --- | --- | --- |
| Number | [#1](https://shopmath.org/drills/number/1.md) | 0.2280 | 5.791 | -0.0200 in |
| Letter | [E](https://shopmath.org/drills/letter/e.md) | 0.2500 | 6.350 | +0.0020 in |
| Fractional | [1/4](https://shopmath.org/drills/fractional/1-4.md) | 0.2500 | 6.350 | +0.0020 in |

## Threads Tapped With a 6.3 mm Drill

| Thread | Pitch | Thread engagement (%) |
| --- | --- | --- |
| [M7×0.75](https://shopmath.org/threads/metric-fine/m7x0.75.md) | 0.750 mm | 71.8 |

_Engagement is what the real drill leaves with a cut tap, not the requested target._

## Sources and Method for the 6.3 mm Drill Size

### Drill index

- **Source**: Number/letter: bd_warehouse drill_sizes.csv (Apache-2.0) cross-checked against Wikipedia Drill bit sizes (CC BY-SA 4.0). Fractional: computed 1/64 in steps per ANSI B94.11M. Metric: computed BS 328 increment pattern.
- **Method**: computed
- **Verified against**: Wikipedia Drill bit sizes (CC BY-SA 4.0); 31/31 checks passed

### Assumptions

- Drill diameters are nominal. A worn or run-out drill cuts oversize; measure the hole, not the shank, when the fit matters.
- Dataset scope: Number sizes #61-#80 are stored but tagged demandTier 'extended' — query-space-map.md Appendix A found the tail thinning in the 60s. Sizes below #80 and metric sizes above 25.0 mm excluded.

**Data last verified**: August 1, 2026

## Common Questions About the 6.3 mm Drill Bit

### What size is a 6.3 mm drill bit size?

A 6.3 mm drill bit is 0.2480 in (6.300 mm) in diameter.

### What fraction is a 6.3 mm drill bit?

6.3 mm is 0.2480 in (6.300 mm), which is not itself a fractional size. The closest fractional drill is 1/4 at 0.2500 in (6.350 mm).

### What thread does a 6.3 mm drill bit tap?

A 6.3 mm drill is the recommended tap drill for M7×0.75. That leaves the thread engagement shown in the table above with a cut tap.

## Related pages

- Next size down (any series): [D](https://shopmath.org/drills/letter/d.md) — 0.2460 in (6.248 mm)
- Next size up (any series): [E](https://shopmath.org/drills/letter/e.md) — 0.2500 in (6.350 mm)
- Previous in the metric series: [6.2 mm](https://shopmath.org/drills/metric/6-2mm.md)
- Next in the metric series: [6.4 mm](https://shopmath.org/drills/metric/6-4mm.md)
- All metric sizes: [Metric drill sizes](https://shopmath.org/drills/metric.md)
- All drill sizes: [Drill bit size reference](https://shopmath.org/drills.md)
- Complete index by diameter: [Drill size chart](https://shopmath.org/charts/drill-sizes.md)
- Tap drills by thread: [Tap drill chart](https://shopmath.org/charts/tap-drill.md)

---

*Source: [ShopMath](https://shopmath.org/drills/metric/6-3mm) — data verified August 1, 2026. Reference data; verify against the governing standard before manufacture.*