---
type: "drill"
designation: "#30"
series: "number"
series_name: "Number Drill Sizes"
diameter_in: 0.1285
diameter_mm: 3.2639
standard: "ANSI/ASME B94.11M; BS 328"
verified: "August 1, 2026"
url: https://shopmath.org/drills/number/30
---

# #30 Drill Bit Size — 0.1285 in / 3.264 mm

A #30 drill bit is 0.1285 in (3.264 mm) in diameter. It belongs to the number series of standard twist drills.

- **Designation**: #30
- **Series**: Number
- **Diameter**: 0.1285 in (3.264 mm)

## #30 Drill Diameter

| Property | Value |
| --- | --- |
| Designation | #30 |
| Series | Number |
| Diameter (in) | 0.1285 |
| Diameter (mm) | 3.264 |

## #30 Drill Equivalents in the Other Size Series

The nearest standard drill to #30 in each of the other three series. Nothing here is an exact match unless the difference column reads 0.0000 in.

| Series | Nearest drill | Diameter (in) | Diameter (mm) | Difference |
| --- | --- | --- | --- | --- |
| Letter | [A](https://shopmath.org/drills/letter/a.md) | 0.2340 | 5.944 | +0.1055 in |
| Fractional | [1/8](https://shopmath.org/drills/fractional/1-8.md) | 0.1250 | 3.175 | -0.0035 in |
| Metric | [3.3 mm](https://shopmath.org/drills/metric/3-3mm.md) | 0.1299 | 3.300 | +0.0014 in |

## Sources and Method for the #30 Drill Size

### Drill index

- **Source**: Number/letter: bd_warehouse drill_sizes.csv (Apache-2.0) cross-checked against Wikipedia Drill bit sizes (CC BY-SA 4.0). Fractional: computed 1/64 in steps per ANSI B94.11M. Metric: computed BS 328 increment pattern.
- **Method**: compiled
- **Verified against**: Wikipedia Drill bit sizes (CC BY-SA 4.0); 31/31 checks passed

### Assumptions

- Drill diameters are nominal. A worn or run-out drill cuts oversize; measure the hole, not the shank, when the fit matters.
- Dataset scope: Number sizes #61-#80 are stored but tagged demandTier 'extended' — query-space-map.md Appendix A found the tail thinning in the 60s. Sizes below #80 and metric sizes above 25.0 mm excluded.

**Data last verified**: August 1, 2026

## Common Questions About the #30 Drill Bit

### What size is a #30 drill bit size?

A #30 drill bit is 0.1285 in (3.264 mm) in diameter.

### What is the metric equivalent of a #30 drill bit?

The closest metric drill to #30 (0.1285 in (3.264 mm)) is 3.3 mm at 0.1299 in (3.300 mm) — a difference of 0.0014 in.

### What fraction is a #30 drill bit?

#30 is 0.1285 in (3.264 mm), which is not itself a fractional size. The closest fractional drill is 1/8 at 0.1250 in (3.175 mm).

## Related pages

- Next size down (any series): [3.2 mm](https://shopmath.org/drills/metric/3-2mm.md) — 0.1260 in (3.200 mm)
- Next size up (any series): [3.3 mm](https://shopmath.org/drills/metric/3-3mm.md) — 0.1299 in (3.300 mm)
- Previous in the number series: [#29](https://shopmath.org/drills/number/29.md)
- Next in the number series: [#31](https://shopmath.org/drills/number/31.md)
- All number sizes: [Number drill sizes](https://shopmath.org/drills/number.md)
- All drill sizes: [Drill bit size reference](https://shopmath.org/drills.md)
- Complete index by diameter: [Drill size chart](https://shopmath.org/charts/drill-sizes.md)
- Tap drills by thread: [Tap drill chart](https://shopmath.org/charts/tap-drill.md)

---

*Source: [ShopMath](https://shopmath.org/drills/number/30) — data verified August 1, 2026. Reference data; verify against the governing standard before manufacture.*