---
type: "drill"
designation: "#37"
series: "number"
series_name: "Number Drill Sizes"
diameter_in: 0.104
diameter_mm: 2.6416
standard: "ANSI/ASME B94.11M; BS 328"
verified: "August 1, 2026"
url: https://shopmath.org/drills/number/37
---

# #37 Drill Bit Size — 0.1040 in / 2.642 mm

A #37 drill bit is 0.1040 in (2.642 mm) in diameter. It belongs to the number series of standard twist drills. It is the recommended tap drill for #5-44 UNF.

- **Designation**: #37
- **Series**: Number
- **Diameter**: 0.1040 in (2.642 mm)

## #37 Drill Diameter

| Property | Value |
| --- | --- |
| Designation | #37 |
| Series | Number |
| Diameter (in) | 0.1040 |
| Diameter (mm) | 2.642 |

## #37 Drill Equivalents in the Other Size Series

The nearest standard drill to #37 in each of the other three series. Nothing here is an exact match unless the difference column reads 0.0000 in.

| Series | Nearest drill | Diameter (in) | Diameter (mm) | Difference |
| --- | --- | --- | --- | --- |
| Letter | [A](https://shopmath.org/drills/letter/a.md) | 0.2340 | 5.944 | +0.1300 in |
| Fractional | [7/64](https://shopmath.org/drills/fractional/7-64.md) | 0.1094 | 2.778 | +0.0054 in |
| Metric | [2.65 mm](https://shopmath.org/drills/metric/2-65mm.md) | 0.1043 | 2.650 | +0.0003 in |

## Threads Tapped With a #37 Drill

| Thread | Pitch | Thread engagement (%) |
| --- | --- | --- |
| [#5-44 UNF](https://shopmath.org/threads/unf/5-44.md) | 44 TPI | 71.1 |

_Engagement is what the real drill leaves with a cut tap, not the requested target._

## Sources and Method for the #37 Drill Size

### Drill index

- **Source**: Number/letter: bd_warehouse drill_sizes.csv (Apache-2.0) cross-checked against Wikipedia Drill bit sizes (CC BY-SA 4.0). Fractional: computed 1/64 in steps per ANSI B94.11M. Metric: computed BS 328 increment pattern.
- **Method**: compiled
- **Verified against**: Wikipedia Drill bit sizes (CC BY-SA 4.0); 31/31 checks passed

### Assumptions

- Drill diameters are nominal. A worn or run-out drill cuts oversize; measure the hole, not the shank, when the fit matters.
- Dataset scope: Number sizes #61-#80 are stored but tagged demandTier 'extended' — query-space-map.md Appendix A found the tail thinning in the 60s. Sizes below #80 and metric sizes above 25.0 mm excluded.

**Data last verified**: August 1, 2026

## Common Questions About the #37 Drill Bit

### What size is a #37 drill bit size?

A #37 drill bit is 0.1040 in (2.642 mm) in diameter.

### What is the metric equivalent of a #37 drill bit?

The closest metric drill to #37 (0.1040 in (2.642 mm)) is 2.65 mm at 0.1043 in (2.650 mm) — a difference of 0.0003 in.

### What fraction is a #37 drill bit?

#37 is 0.1040 in (2.642 mm), which is not itself a fractional size. The closest fractional drill is 7/64 at 0.1094 in (2.778 mm).

### What thread does a #37 drill bit tap?

A #37 drill is the recommended tap drill for #5-44 UNF. That leaves the thread engagement shown in the table above with a cut tap.

## Related pages

- Next size down (any series): [2.6 mm](https://shopmath.org/drills/metric/2-6mm.md) — 0.1024 in (2.600 mm)
- Next size up (any series): [2.65 mm](https://shopmath.org/drills/metric/2-65mm.md) — 0.1043 in (2.650 mm)
- Previous in the number series: [#36](https://shopmath.org/drills/number/36.md)
- Next in the number series: [#38](https://shopmath.org/drills/number/38.md)
- All number sizes: [Number drill sizes](https://shopmath.org/drills/number.md)
- All drill sizes: [Drill bit size reference](https://shopmath.org/drills.md)
- Complete index by diameter: [Drill size chart](https://shopmath.org/charts/drill-sizes.md)
- Tap drills by thread: [Tap drill chart](https://shopmath.org/charts/tap-drill.md)

---

*Source: [ShopMath](https://shopmath.org/drills/number/37) — data verified August 1, 2026. Reference data; verify against the governing standard before manufacture.*