---
type: "o-ring"
dash_number: "342"
designation: "AS568-342"
cs_series: "309-395"
cs_series_name: "AS568 3/16 in series"
id_in: 3.6
id_mm: 91.44
cs_in: 0.21
cs_mm: 5.33
od_in: 4.02
od_mm: 102.1
id_tol_in: 0.028
cs_tol_in: 0.0051
standard: "SAE AS568; MIL-G-5514G (public domain, inactive for new design)"
verified: "August 1, 2026"
url: https://shopmath.org/o-rings/as568-342
---

# AS568-342 O-Ring Size — ID, Cross-Section and OD

An AS568-342 o-ring has an inside diameter of 3.6000 in (91.440 mm) and a 0.2100 in (5.330 mm) cross-section, for an outside diameter of 4.0200 in (102.100 mm). It belongs to the AS568 3/16 in series band.

- **Dash number**: 342
- **Cross-section series**: AS568 3/16 in series
- **Inside diameter**: 3.6000 in (91.440 mm)
- **Cross-section**: 0.2100 in (5.330 mm)
- **Outside diameter**: 4.0200 in (102.100 mm)
- **Standard**: SAE AS568; MIL-G-5514G (public domain, inactive for new design)

## AS568-342 Dimensions and Tolerances

| Dimension | Inch | Millimetre |
| --- | --- | --- |
| Inside diameter (ID) | 3.6000 | 91.440 |
| Cross-section (CS) | 0.2100 | 5.330 |
| Outside diameter (OD) | 4.0200 | 102.100 |
| ID tolerance | ±0.0280 | ±0.710 |
| CS tolerance | ±0.0051 | ±0.130 |

_Outside diameter is computed as ID + 2 × CS; AS568 tabulates ID and CS._

## Gland Design for AS568-342

Static gland dimensions for the 0.210 in cross-section. Depth is the groove depth that produces the stated squeeze on a nominal ring.

| Application | Squeeze | Squeeze (in) | Gland depth (in) | Gland depth (mm) |
| --- | --- | --- | --- | --- |
| Static face seal | 21–30% | 0.0441 – 0.0630 | 0.1470 – 0.1659 | 3.734 – 4.214 |

_Gland depth is computed as CS − (CS × squeeze %), then checked against the published design charts. Groove width, corner radius and back-up ring allowances are outside this dataset._

## O-Ring Sizes Closest to AS568-342

Nearest AS568 sizes by inside diameter — the substitutes to check when this one is out of stock.

| Size | ID (in) | ID (mm) | CS (in) | OD (in) |
| --- | --- | --- | --- | --- |
| [AS568-239](https://shopmath.org/o-rings/as568-239.md) | 3.6090 | 91.670 | 0.1390 | 3.8870 |
| [AS568-043](https://shopmath.org/o-rings/as568-043.md) | 3.4890 | 88.620 | 0.0700 | 3.6290 |
| [AS568-153](https://shopmath.org/o-rings/as568-153.md) | 3.4870 | 88.570 | 0.1030 | 3.6930 |
| [AS568-238](https://shopmath.org/o-rings/as568-238.md) | 3.4840 | 88.490 | 0.1390 | 3.7620 |
| [AS568-341](https://shopmath.org/o-rings/as568-341.md) | 3.4750 | 88.270 | 0.2100 | 3.8950 |
| [AS568-343](https://shopmath.org/o-rings/as568-343.md) | 3.7250 | 94.620 | 0.2100 | 4.1450 |

## Sources and Method for AS568-342

### AS568 dimensions

- **Source**: bd_warehouse o-ring_parameters.csv (Apache-2.0) and bckasper3/KasperCalc oring-sizes.js (MIT), agreeing on all 349 sizes; OD computed as ID + 2 x CS
- **Method**: computed+compiled
- **Verified against**: two independent open datasets agreeing on all 349 sizes; fabricated-dataset negative control passed; 21 checks total

### Gland design

- **Source**: MIL-G-5514G (public domain) gland design criteria; squeeze-percentage bands cross-read from Parker O-Ring Handbook ORD-5700 Design Charts 4-2/4-3 (verification only); depth = CS - CS x squeeze%
- **Method**: computed
- **Verified against**: computed depth band brackets the published design-chart band for every series

### Assumptions

- Dimensions are for a nominal, unstretched ring at room temperature. Installed stretch reduces cross-section.
- Gland figures are static-application only and assume a nominal ring; they carry no compound, temperature or pressure assumption.
- Dataset scope: A fabricated-dataset negative control is asserted against on every run. EXCLUDED: groove width, corner radius, diametral clearance, back-up ring widths, surface finish, all dynamic glands, the 900-series, and ISO 3601 metric sizes.

**Data last verified**: August 1, 2026

## Common Questions About the AS568-342 O-Ring

### What size is an AS568-342 o-ring?

AS568-342 has an inside diameter of 3.6000 in (91.440 mm) and a cross-section of 0.2100 in (5.330 mm), giving an outside diameter of 4.0200 in (102.100 mm).

### What is the o-ring size tolerance on AS568-342?

The AS568 tolerance on AS568-342 is ±0.0280 in (±0.710 mm) on the inside diameter and ±0.0051 in (±0.130 mm) on the cross-section.

### What groove depth does an AS568-342 o-ring need?

For a static face seal, an 0.210 in cross-section needs a gland depth of 0.1470 to 0.1659 in (3.734 to 4.214 mm), which puts the ring at 21–30% squeeze.

### What o-ring is closest in size to AS568-342?

The nearest AS568 sizes by inside diameter are AS568-239 (3.6090 in ID), AS568-043 (3.4890 in ID), AS568-153 (3.4870 in ID).

## Related pages

- Previous dash number: [AS568-341](https://shopmath.org/o-rings/as568-341.md) — 3.4750 in ID
- Next dash number: [AS568-343](https://shopmath.org/o-rings/as568-343.md) — 3.7250 in ID
- All o-ring sizes: [AS568 o-ring reference](https://shopmath.org/o-rings.md)
- Full size chart: [AS568 o-ring size chart](https://shopmath.org/charts/o-ring-sizes.md)

---

*Source: [ShopMath](https://shopmath.org/o-rings/as568-342) — data verified August 1, 2026. Reference data; verify against the governing standard before manufacture.*