---
type: "o-ring"
dash_number: "447"
designation: "AS568-447"
cs_series: "425-475"
cs_series_name: "AS568 1/4 in series"
id_in: 8.975
id_mm: 227.97
cs_in: 0.275
cs_mm: 6.99
od_in: 9.525
od_mm: 241.95
id_tol_in: 0.0551
cs_tol_in: 0.0059
standard: "SAE AS568; MIL-G-5514G (public domain, inactive for new design)"
verified: "August 1, 2026"
url: https://shopmath.org/o-rings/as568-447
---

# AS568-447 O-Ring Size — ID, Cross-Section and OD

An AS568-447 o-ring has an inside diameter of 8.9750 in (227.970 mm) and a 0.2750 in (6.990 mm) cross-section, for an outside diameter of 9.5250 in (241.950 mm). It belongs to the AS568 1/4 in series band.

- **Dash number**: 447
- **Cross-section series**: AS568 1/4 in series
- **Inside diameter**: 8.9750 in (227.970 mm)
- **Cross-section**: 0.2750 in (6.990 mm)
- **Outside diameter**: 9.5250 in (241.950 mm)
- **Standard**: SAE AS568; MIL-G-5514G (public domain, inactive for new design)

## AS568-447 Dimensions and Tolerances

| Dimension | Inch | Millimetre |
| --- | --- | --- |
| Inside diameter (ID) | 8.9750 | 227.970 |
| Cross-section (CS) | 0.2750 | 6.990 |
| Outside diameter (OD) | 9.5250 | 241.950 |
| ID tolerance | ±0.0551 | ±1.400 |
| CS tolerance | ±0.0059 | ±0.150 |

_Outside diameter is computed as ID + 2 × CS; AS568 tabulates ID and CS._

## Gland Design for AS568-447

Static gland dimensions for the 0.275 in cross-section. Depth is the groove depth that produces the stated squeeze on a nominal ring.

| Application | Squeeze | Squeeze (in) | Gland depth (in) | Gland depth (mm) |
| --- | --- | --- | --- | --- |
| Static face seal | 21–29% | 0.0578 – 0.0798 | 0.1953 – 0.2173 | 4.961 – 5.519 |

_Gland depth is computed as CS − (CS × squeeze %), then checked against the published design charts. Groove width, corner radius and back-up ring allowances are outside this dataset._

## O-Ring Sizes Closest to AS568-447

Nearest AS568 sizes by inside diameter — the substitutes to check when this one is out of stock.

| Size | ID (in) | ID (mm) | CS (in) | OD (in) |
| --- | --- | --- | --- | --- |
| [AS568-373](https://shopmath.org/o-rings/as568-373.md) | 8.9750 | 227.970 | 0.2100 | 9.3950 |
| [AS568-270](https://shopmath.org/o-rings/as568-270.md) | 8.9840 | 228.190 | 0.1390 | 9.2620 |
| [AS568-175](https://shopmath.org/o-rings/as568-175.md) | 8.9870 | 228.270 | 0.1030 | 9.1930 |
| [AS568-174](https://shopmath.org/o-rings/as568-174.md) | 8.7370 | 221.920 | 0.1030 | 8.9430 |
| [AS568-269](https://shopmath.org/o-rings/as568-269.md) | 8.7340 | 221.840 | 0.1390 | 9.0120 |
| [AS568-372](https://shopmath.org/o-rings/as568-372.md) | 8.7250 | 221.620 | 0.2100 | 9.1450 |

## Sources and Method for AS568-447

### AS568 dimensions

- **Source**: bd_warehouse o-ring_parameters.csv (Apache-2.0) and bckasper3/KasperCalc oring-sizes.js (MIT), agreeing on all 349 sizes; OD computed as ID + 2 x CS
- **Method**: computed+compiled
- **Verified against**: two independent open datasets agreeing on all 349 sizes; fabricated-dataset negative control passed; 21 checks total

### Gland design

- **Source**: MIL-G-5514G (public domain) gland design criteria; squeeze-percentage bands cross-read from Parker O-Ring Handbook ORD-5700 Design Charts 4-2/4-3 (verification only); depth = CS - CS x squeeze%
- **Method**: computed
- **Verified against**: computed depth band brackets the published design-chart band for every series

### Assumptions

- Dimensions are for a nominal, unstretched ring at room temperature. Installed stretch reduces cross-section.
- Gland figures are static-application only and assume a nominal ring; they carry no compound, temperature or pressure assumption.
- Dataset scope: A fabricated-dataset negative control is asserted against on every run. EXCLUDED: groove width, corner radius, diametral clearance, back-up ring widths, surface finish, all dynamic glands, the 900-series, and ISO 3601 metric sizes.

**Data last verified**: August 1, 2026

## Common Questions About the AS568-447 O-Ring

### What size is an AS568-447 o-ring?

AS568-447 has an inside diameter of 8.9750 in (227.970 mm) and a cross-section of 0.2750 in (6.990 mm), giving an outside diameter of 9.5250 in (241.950 mm).

### What is the o-ring size tolerance on AS568-447?

The AS568 tolerance on AS568-447 is ±0.0551 in (±1.400 mm) on the inside diameter and ±0.0059 in (±0.150 mm) on the cross-section.

### What groove depth does an AS568-447 o-ring need?

For a static face seal, an 0.275 in cross-section needs a gland depth of 0.1953 to 0.2173 in (4.961 to 5.519 mm), which puts the ring at 21–29% squeeze.

### What o-ring is closest in size to AS568-447?

The nearest AS568 sizes by inside diameter are AS568-373 (8.9750 in ID), AS568-270 (8.9840 in ID), AS568-175 (8.9870 in ID).

## Related pages

- Previous dash number: [AS568-446](https://shopmath.org/o-rings/as568-446.md) — 8.4750 in ID
- Next dash number: [AS568-448](https://shopmath.org/o-rings/as568-448.md) — 9.4750 in ID
- All o-ring sizes: [AS568 o-ring reference](https://shopmath.org/o-rings.md)
- Full size chart: [AS568 o-ring size chart](https://shopmath.org/charts/o-ring-sizes.md)

---

*Source: [ShopMath](https://shopmath.org/o-rings/as568-447) — data verified August 1, 2026. Reference data; verify against the governing standard before manufacture.*