--- type: "thread" name: "14-8 NPT" designation: "14-8 NPT" series: "npt" series_name: "NPT Taper Pipe Thread" system: "pipe" size_label: "14" tpi: 8 pitch_in: 0.125 pitch_mm: 3.175 basic_major_dia_in: 14 basic_major_dia_mm: 355.6 basic_pitch_dia_in: 13.87263 basic_pitch_dia_mm: 352.3648 basic_minor_dia_in: 13.7726 basic_minor_dia_mm: 349.824 tap_drill: "1" tap_drill_dia_in: 1 tap_drill_dia_mm: 25.4 standard: "ASME B1.20.1, ASME B1.20.3; public-domain primary FED-STD-H28/7A (1984)" verified: "August 1, 2026" url: https://shopmath.org/threads/npt/14 --- # 14-8 NPT Thread — Dimensions, Tap Drill & Clearance The tap drill for 14-8 NPT taper pipe thread is 1 — 1.0000 in (25.400 mm). Basic pitch diameter is 13.8726 in (352.365 mm) and basic minor diameter is 13.7726 in (349.824 mm). - **Series**: NPT Taper Pipe Thread - **Designation**: 14-8 NPT - **Threads per inch**: 8 - **Tap drill**: 1 - **Standard**: ASME B1.20.1, ASME B1.20.3; public-domain primary FED-STD-H28/7A (1984) ## Basic Thread Dimensions for 14-8 NPT | Property | Inch | Millimetre | | --- | --- | --- | | Basic major diameter | 14.0000 | 355.600 | | Threads per inch | 8 | — | | Pitch | 0.1250 | 3.175 | | Basic pitch diameter | 13.8726 | 352.365 | | Basic minor diameter | 13.7726 | 349.824 | | Sharp V thread height (H) | 0.1082 | 2.750 | _Basic dimensions are the theoretical values before any tolerance class is applied._ ## Taper Pipe Thread Geometry for 14-8 NPT 14-8 NPT is a taper thread: the diameter changes along the thread, so every diameter below is stated at a named plane. The taper is 0.7500 in per foot on diameter. | Property | Inch | Millimetre | | --- | --- | --- | | Pipe outside diameter | 14.0000 | 355.600 | | Taper on diameter, per foot | 0.7500 | 19.050 | | Pitch Ø at end of pipe (E₀) | 13.7750 | 349.885 | | Pitch Ø at hand-tight plane (E₁) | 13.8726 | 352.365 | | Pitch Ø at effective plane (E₂) | 13.9156 | 353.457 | | Hand-tight engagement (L₁) | 1.5620 | 39.675 | | Effective thread length (L₂) | 2.2500 | 57.150 | | Overall external thread length (L₄) | 2.6837 | 68.166 | | Thread height (h) | 0.1000 | 2.540 | | Sharp V height (H) | 0.1082 | 2.750 | | Minor Ø at hand-tight plane | 13.7726 | 349.824 | _ASME B1.20.1 publishes these dimensions in inches only; the millimetre column is an exact conversion (1 in ≡ 25.4 mm). L₁ is the hand-tight engagement length and is tabulated in the standard, not derived._ ## Sources and Method for 14-8 NPT ### Basic dimensions - **Source**: ASME B1.20.1 taper pipe thread formulas; E0 and L2 reproduced to 5 decimals in docs/research/data-sourcing.md §3.3. Public-domain primary: FED-STD-H28/7A (1984).; pipe OD / tpi / L1 / L4: ASME B1.20.1 pipe OD / tpi / L1 / L4 via Wikipedia National pipe thread (CC BY-SA 4.0); OD and tpi cross-checked against FreeCAD FeatureHole.cpp NPT block (LGPL-2.1+) - **Method**: computed+compiled - **Verified against**: Wikipedia National pipe thread standard-sizes table (CC BY-SA 4.0) — 98 checks passed to 1e-5 in ### Taper pipe geometry - **Source**: ASME B1.20.1 taper pipe thread formulas; E0 and L2 reproduced to 5 decimals in docs/research/data-sourcing.md §3.3. Public-domain primary: FED-STD-H28/7A (1984).; pipe OD / tpi / L1 / L4: ASME B1.20.1 pipe OD / tpi / L1 / L4 via Wikipedia National pipe thread (CC BY-SA 4.0); OD and tpi cross-checked against FreeCAD FeatureHole.cpp NPT block (LGPL-2.1+) - **Method**: computed+compiled - **Verified against**: Wikipedia National pipe thread standard-sizes table (CC BY-SA 4.0) — 98 checks passed to 1e-5 in ### Assumptions - NPT threads are not a seal on their own — the standard assumes a sealing compound or tape on the joint. - Dataset scope: L1 is tabulated, not derivable (data-sourcing.md §3.3). EXCLUDED: NPTF crest/root truncation limits (single-sourced), NPSM/NPSC/NPSF straight pipe threads, BSPT/BSPP. **Data last verified**: August 1, 2026 ## Common Questions About 14-8 NPT ### What is the tap drill size for 14-8 NPT? The tap drill for 14-8 NPT is 1 — 1.0000 in (25.400 mm). Taper pipe threads are tapped with a taper tap and sealed with compound or tape. ### What is the pitch diameter of 14-8 NPT? The basic pitch diameter of 14-8 NPT is 13.8726 in (352.365 mm). ### What is the minor diameter of 14-8 NPT? The basic minor diameter of 14-8 NPT is 13.7726 in (349.824 mm). That is the theoretical root of the internal thread, not the drilled hole size — see the tap drill table for the hole to drill. ### What is the thread pitch of 14-8 NPT? 14-8 NPT has 8 threads per inch, a pitch of 0.1250 in (3.175 mm). ### What is the hand-tight engagement length (L₁) of 14-8 NPT? The hand-tight engagement length L₁ for 14-8 NPT is 1.5620 in (39.675 mm), on a pipe outside diameter of 14.0000 in (355.600 mm). ## Related pages - Smaller in NPT Taper Pipe Thread: [12-8 NPT](https://shopmath.org/threads/npt/12.md) — tap drill 1 - Larger in NPT Taper Pipe Thread: [16-8 NPT](https://shopmath.org/threads/npt/16.md) — tap drill 1 - All NPT Taper Pipe Thread sizes: [NPT Taper Pipe Thread thread chart](https://shopmath.org/threads/npt.md) - Every thread series: [Screw thread reference](https://shopmath.org/threads.md) - Cross-series chart: [Tap drill chart](https://shopmath.org/charts/tap-drill.md) --- *Source: [ShopMath](https://shopmath.org/threads/npt/14) — data verified August 1, 2026. Reference data; verify against the governing standard before manufacture.*