---
type: "thread"
name: "1 1/16\"-18 UNEF"
designation: "1 1/16-18 UNEF"
series: "unef"
series_name: "Unified Extra Fine (UNEF)"
system: "unified"
size_label: "1 1/16"
tpi: 18
pitch_in: 0.055556
pitch_mm: 1.4111
basic_major_dia_in: 1.0625
basic_major_dia_mm: 26.9875
basic_pitch_dia_in: 1.0264
basic_pitch_dia_mm: 26.0706
basic_minor_dia_in: 1.0024
basic_minor_dia_mm: 25.461
tap_drill: "1"
tap_drill_dia_in: 1
tap_drill_dia_mm: 25.4
tap_drill_thread_pct: 86.6
tensile_stress_area_sqin: 0.798606
tensile_stress_area_sqmm: 515.229
internal_class_assumed: "2B"
standard: "ASME B1.1 (reference values based on the ASME B1.1 system; not a compliance claim)"
verified: "August 1, 2026"
url: https://shopmath.org/threads/unef/1-1-16-18
---

# 1 1/16"-18 UNEF Thread — Dimensions, Tap Drill & Clearance

The tap drill for 1 1/16"-18 UNEF is 1 — 1.0000 in (25.400 mm) — which leaves 86.6% thread engagement with a cut tap. Basic pitch diameter is 1.0264 in (26.071 mm) and basic minor diameter is 1.0024 in (25.461 mm). Tapped-hole figures on this page assume a class 2B thread; drill sizes for 50–85% engagement are in the tap drill table below.

- **Series**: Unified Extra Fine (UNEF)
- **Designation**: 1 1/16-18 UNEF
- **Threads per inch**: 18
- **Tap drill**: 1
- **Standard**: ASME B1.1 (reference values based on the ASME B1.1 system; not a compliance claim)

## Basic Thread Dimensions for 1 1/16"-18 UNEF

| Property | Inch | Millimetre |
| --- | --- | --- |
| Basic major diameter | 1.0625 | 26.988 |
| Threads per inch | 18 | — |
| Pitch | 0.0556 | 1.411 |
| Basic pitch diameter | 1.0264 | 26.071 |
| Basic minor diameter | 1.0024 | 25.461 |
| External thread root diameter | 0.9963 | 25.306 |
| Sharp V thread height (H) | 0.0481 | 1.222 |

_Basic dimensions are the theoretical values before any tolerance class is applied._

## Tap Drill Sizes for 1 1/16"-18 UNEF

Cut taps, from 50% to 85% thread engagement. The shop default is 75% — a 1 drill.

| Thread % | Target hole Ø (in) | Target hole Ø (mm) | Drill | Drill Ø (in) | Drill Ø (mm) | Actual thread % |
| --- | --- | --- | --- | --- | --- | --- |
| 50% | 1.0264 | 26.071 | 1 | 1.0000 | 25.400 | 86.6 |
| 60% | 1.0192 | 25.888 | 1 | 1.0000 | 25.400 | 86.6 |
| 65% | 1.0156 | 25.796 | 1 | 1.0000 | 25.400 | 86.6 |
| 70% | 1.0120 | 25.705 | 1 | 1.0000 | 25.400 | 86.6 |
| 75% (default) | 1.0084 | 25.613 | 1 | 1.0000 | 25.400 | 86.6 |
| 80% | 1.0048 | 25.522 | 1 | 1.0000 | 25.400 | 86.6 |
| 85% | 1.0012 | 25.430 | 1 | 1.0000 | 25.400 | 86.6 |

_Target hole Ø is the theoretical hole for the stated engagement. The drill column is the nearest size in the standard number/letter/fractional/metric index, and actual thread % is what that real drill produces._

## Thread Class Limits for 1 1/16"-18 UNEF

Manufacturing limits for classes 2B, 3B, 2A, 3A. A gauge reading outside these bands is a reject, not a judgement call.

### External thread (bolt / screw) limits

| Limit | Class 2A (in) | Class 2A (mm) | Class 3A (in) | Class 3A (mm) |
| --- | --- | --- | --- | --- |
| Major Ø max | 1.0611 | 26.952 | 1.0625 | 26.988 |
| Major Ø min | 1.0523 | 26.728 | 1.0538 | 26.767 |
| Pitch Ø max | 1.0250 | 26.035 | 1.0264 | 26.071 |
| Pitch Ø min | 1.0202 | 25.913 | 1.0228 | 25.979 |
| Pitch Ø tolerance | 0.0048 | 0.122 | 0.0036 | 0.091 |
| Minor Ø max | 0.9889 | 25.118 | 0.9903 | 25.154 |
| Minor Ø min | 0.9841 | 24.996 | 0.9867 | 25.062 |
| Allowance | 0.0014 | 0.036 | 0.0000 | 0.000 |

### Internal thread (nut / tapped hole) limits

| Limit | Class 2B (in) | Class 2B (mm) | Class 3B (in) | Class 3B (mm) |
| --- | --- | --- | --- | --- |
| Major Ø max | 1.0767 | 27.348 | 1.0752 | 27.310 |
| Major Ø min | 1.0625 | 26.988 | 1.0625 | 26.988 |
| Pitch Ø max | 1.0326 | 26.228 | 1.0311 | 26.190 |
| Pitch Ø min | 1.0264 | 26.071 | 1.0264 | 26.071 |
| Pitch Ø tolerance | 0.0062 | 0.158 | 0.0047 | 0.119 |
| Minor Ø max | 1.0150 | 25.781 | 1.0105 | 25.667 |
| Minor Ø min | 1.0024 | 25.461 | 1.0024 | 25.461 |
| Allowance | 0.0000 | 0.000 | 0.0000 | 0.000 |

## Tensile Stress Area of 1 1/16"-18 UNEF

| Property | in² | mm² |
| --- | --- | --- |
| Tensile stress area | 0.79861 | 515.23 |

The effective cross-section used to size a 1 1/16"-18 UNEF fastener against a load. Multiply it by the material's allowable stress — the area itself carries no strength assumption.

## Sources and Method for 1 1/16"-18 UNEF

### Basic dimensions

- **Source**: NBS Handbook H28 (1969) Part I §§6-7 (public domain, 17 U.S.C. 105); normative modern reference ASME B1.1; series membership: Series membership: threadlib UIS_thread.csv (BSD-3-Clause); cross-checked against NBS H28 (1969) Part I Table 2.21; clearance holes: ISO 273 (metric) and ASME B18.2.8 (inch) via FreeCAD FeatureHole.cpp (LGPL-2.1+), cross-checked against bd_warehouse clearance_hole_sizes.csv (Apache-2.0)
- **Method**: computed
- **Verified against**: NBS H28 (1969) Part I, Table 2.21 (public domain); cross-checked against FreeCAD CAM thread tables (LGPL-2.1+) — 1064 checks passed at 0.0001 in

### Tap drill sizes

- **Source**: Machinery's Handbook %-thread formula (geometry-derived); nearest-standard-drill-to-75% rule verified at 36/39 published chart rows in docs/research/data-sourcing.md §3.4
- **Method**: computed
- **Verified against**: Wikipedia Unified Thread Standard, preferred cutting tap drill size columns (CC BY-SA 4.0) — 36/39 published UNC+UNF rows reproduced

### Class limits

- **Source**: NBS Handbook H28 (1969) Part I §§6-7 (public domain, 17 U.S.C. 105); normative modern reference ASME B1.1
- **Method**: computed
- **Verified against**: NBS H28 (1969) Part I, Table 2.21 (public domain); cross-checked against FreeCAD CAM thread tables (LGPL-2.1+) — 1064 checks passed at 0.0001 in

### Formulas

**Tap drill hole diameter, inch threads**

```text
hole Ø  =  D − (%thread ÷ 100) × (1.29904 ÷ n)

  D = basic major diameter (in)
  n = threads per inch
```

_1.29904 = 2 × 0.64952, twice the engaged thread height per side on the 60° Unified profile._

**Actual thread engagement of the chosen drill**

```text
%thread  =  (D − drill Ø) × n ÷ 1.29904 × 100
```

_The drill column rounds to a real drill; this is the engagement that drill actually leaves._

**Tensile stress area, Unified inch threads**

```text
At  =  0.7854 × (D − 0.9743 ÷ n)²
```

_ASME B1.1 / NBS H28 form. Reproduces the stored value exactly for this thread._

### Assumptions

- The headline tap drill assumes 75% thread engagement, the general shop default. Every engagement from 50% to 85% is in the tap drill table — change the assumption and the number moves.
- Tap drill figures are for cut taps. Drill diameters are nominal; a worn or run-out drill cuts oversize and reduces engagement further.
- Tapped-hole figures assume a class 2B internal thread, the general-purpose fit.
- Dataset scope: Le = 1D for UNC/UNF, 9P for UNEF — determined empirically against H28 Table 2.21, resolving data-sourcing.md open item 5. EXCLUDED: form (roll) tap drills, class 1A/1B limits, class 1AR allowances, constant-pitch UN series.

**Data last verified**: August 1, 2026

## Common Questions About 1 1/16"-18 UNEF

### What is the tap drill size for 1 1/16"-18 UNEF?

The tap drill for 1 1/16"-18 UNEF is 1 — 1.0000 in (25.400 mm). That leaves 86.6% thread engagement with a cut tap.

### What is the pitch diameter of 1 1/16"-18 UNEF?

The basic pitch diameter of 1 1/16"-18 UNEF is 1.0264 in (26.071 mm). For a class 2B thread it runs 1.0264 in (26.071 mm) to 1.0326 in (26.228 mm).

### What is the minor diameter of 1 1/16"-18 UNEF?

The basic minor diameter of 1 1/16"-18 UNEF is 1.0024 in (25.461 mm). That is the theoretical root of the internal thread, not the drilled hole size — see the tap drill table for the hole to drill.

### What is the thread pitch of 1 1/16"-18 UNEF?

1 1/16"-18 UNEF has 18 threads per inch, a pitch of 0.0556 in (1.411 mm).

### What is the tensile stress area of 1 1/16"-18 UNEF?

The tensile stress area of 1 1/16"-18 UNEF is 0.79861 in² (515.23 mm²). Multiply it by the fastener material's allowable stress to get a load.

## Related pages

- Smaller in Unified Extra Fine (UNEF): [1"-20 UNEF](https://shopmath.org/threads/unef/1-20.md) — tap drill 61/64
- Larger in Unified Extra Fine (UNEF): [1 1/8"-18 UNEF](https://shopmath.org/threads/unef/1-1-8-18.md) — tap drill 1
- All Unified Extra Fine (UNEF) sizes: [Unified Extra Fine (UNEF) thread chart](https://shopmath.org/threads/unef.md)
- Every thread series: [Screw thread reference](https://shopmath.org/threads.md)
- Cross-series chart: [Tap drill chart](https://shopmath.org/charts/tap-drill.md)

---

*Source: [ShopMath](https://shopmath.org/threads/unef/1-1-16-18) — data verified August 1, 2026. Reference data; verify against the governing standard before manufacture.*