---
type: "thread"
name: "11/16\"-24 UNEF"
designation: "11/16-24 UNEF"
series: "unef"
series_name: "Unified Extra Fine (UNEF)"
system: "unified"
size_label: "11/16"
tpi: 24
pitch_in: 0.041667
pitch_mm: 1.0583
basic_major_dia_in: 0.6875
basic_major_dia_mm: 17.4625
basic_pitch_dia_in: 0.6604
basic_pitch_dia_mm: 16.7742
basic_minor_dia_in: 0.6424
basic_minor_dia_mm: 16.317
tap_drill: "41/64"
tap_drill_dia_in: 0.640625
tap_drill_dia_mm: 16.2719
tap_drill_thread_pct: 86.6
tensile_stress_area_sqin: 0.328678
tensile_stress_area_sqmm: 212.05
internal_class_assumed: "2B"
standard: "ASME B1.1 (reference values based on the ASME B1.1 system; not a compliance claim)"
verified: "August 1, 2026"
url: https://shopmath.org/threads/unef/11-16-24
---

# 11/16"-24 UNEF Thread — Dimensions, Tap Drill & Clearance

The tap drill for 11/16"-24 UNEF is 41/64 — 0.6406 in (16.272 mm) — which leaves 86.6% thread engagement with a cut tap. Basic pitch diameter is 0.6604 in (16.774 mm) and basic minor diameter is 0.6424 in (16.317 mm). Tapped-hole figures on this page assume a class 2B thread; drill sizes for 50–85% engagement are in the tap drill table below.

- **Series**: Unified Extra Fine (UNEF)
- **Designation**: 11/16-24 UNEF
- **Threads per inch**: 24
- **Tap drill**: 41/64
- **Standard**: ASME B1.1 (reference values based on the ASME B1.1 system; not a compliance claim)

## Basic Thread Dimensions for 11/16"-24 UNEF

| Property | Inch | Millimetre |
| --- | --- | --- |
| Basic major diameter | 0.6875 | 17.462 |
| Threads per inch | 24 | — |
| Pitch | 0.0417 | 1.058 |
| Basic pitch diameter | 0.6604 | 16.774 |
| Basic minor diameter | 0.6424 | 16.317 |
| External thread root diameter | 0.6379 | 16.203 |
| Sharp V thread height (H) | 0.0361 | 0.917 |

_Basic dimensions are the theoretical values before any tolerance class is applied._

## Tap Drill Sizes for 11/16"-24 UNEF

Cut taps, from 50% to 85% thread engagement. The shop default is 75% — a 41/64 drill.

| Thread % | Target hole Ø (in) | Target hole Ø (mm) | Drill | Drill Ø (in) | Drill Ø (mm) | Actual thread % |
| --- | --- | --- | --- | --- | --- | --- |
| 50% | 0.6604 | 16.774 | 21/32 | 0.6563 | 16.669 | 57.7 |
| 60% | 0.6550 | 16.637 | 21/32 | 0.6563 | 16.669 | 57.7 |
| 65% | 0.6523 | 16.568 | 21/32 | 0.6563 | 16.669 | 57.7 |
| 70% | 0.6496 | 16.500 | 21/32 | 0.6563 | 16.669 | 57.7 |
| 75% (default) | 0.6469 | 16.431 | 41/64 | 0.6406 | 16.272 | 86.6 |
| 80% | 0.6442 | 16.363 | 41/64 | 0.6406 | 16.272 | 86.6 |
| 85% | 0.6415 | 16.294 | 41/64 | 0.6406 | 16.272 | 86.6 |

_Target hole Ø is the theoretical hole for the stated engagement. The drill column is the nearest size in the standard number/letter/fractional/metric index, and actual thread % is what that real drill produces._

## Thread Class Limits for 11/16"-24 UNEF

Manufacturing limits for classes 2B, 3B, 2A, 3A. A gauge reading outside these bands is a reject, not a judgement call.

### External thread (bolt / screw) limits

| Limit | Class 2A (in) | Class 2A (mm) | Class 3A (in) | Class 3A (mm) |
| --- | --- | --- | --- | --- |
| Major Ø max | 0.6863 | 17.432 | 0.6875 | 17.462 |
| Major Ø min | 0.6791 | 17.249 | 0.6803 | 17.280 |
| Pitch Ø max | 0.6592 | 16.744 | 0.6604 | 16.774 |
| Pitch Ø min | 0.6552 | 16.642 | 0.6574 | 16.698 |
| Pitch Ø tolerance | 0.0040 | 0.102 | 0.0030 | 0.076 |
| Minor Ø max | 0.6322 | 16.058 | 0.6334 | 16.088 |
| Minor Ø min | 0.6281 | 15.954 | 0.6303 | 16.010 |
| Allowance | 0.0012 | 0.030 | 0.0000 | 0.000 |

### Internal thread (nut / tapped hole) limits

| Limit | Class 2B (in) | Class 2B (mm) | Class 3B (in) | Class 3B (mm) |
| --- | --- | --- | --- | --- |
| Major Ø max | 0.6988 | 17.750 | 0.6975 | 17.716 |
| Major Ø min | 0.6875 | 17.462 | 0.6875 | 17.462 |
| Pitch Ø max | 0.6657 | 16.909 | 0.6644 | 16.876 |
| Pitch Ø min | 0.6604 | 16.774 | 0.6604 | 16.774 |
| Pitch Ø tolerance | 0.0053 | 0.135 | 0.0039 | 0.099 |
| Minor Ø max | 0.6521 | 16.563 | 0.6494 | 16.495 |
| Minor Ø min | 0.6424 | 16.317 | 0.6424 | 16.317 |
| Allowance | 0.0000 | 0.000 | 0.0000 | 0.000 |

## Tensile Stress Area of 11/16"-24 UNEF

| Property | in² | mm² |
| --- | --- | --- |
| Tensile stress area | 0.32868 | 212.05 |

The effective cross-section used to size a 11/16"-24 UNEF fastener against a load. Multiply it by the material's allowable stress — the area itself carries no strength assumption.

## Sources and Method for 11/16"-24 UNEF

### Basic dimensions

- **Source**: NBS Handbook H28 (1969) Part I §§6-7 (public domain, 17 U.S.C. 105); normative modern reference ASME B1.1; series membership: Series membership: threadlib UIS_thread.csv (BSD-3-Clause); cross-checked against NBS H28 (1969) Part I Table 2.21; clearance holes: ISO 273 (metric) and ASME B18.2.8 (inch) via FreeCAD FeatureHole.cpp (LGPL-2.1+), cross-checked against bd_warehouse clearance_hole_sizes.csv (Apache-2.0)
- **Method**: computed
- **Verified against**: NBS H28 (1969) Part I, Table 2.21 (public domain); cross-checked against FreeCAD CAM thread tables (LGPL-2.1+) — 1064 checks passed at 0.0001 in

### Tap drill sizes

- **Source**: Machinery's Handbook %-thread formula (geometry-derived); nearest-standard-drill-to-75% rule verified at 36/39 published chart rows in docs/research/data-sourcing.md §3.4
- **Method**: computed
- **Verified against**: Wikipedia Unified Thread Standard, preferred cutting tap drill size columns (CC BY-SA 4.0) — 36/39 published UNC+UNF rows reproduced

### Class limits

- **Source**: NBS Handbook H28 (1969) Part I §§6-7 (public domain, 17 U.S.C. 105); normative modern reference ASME B1.1
- **Method**: computed
- **Verified against**: NBS H28 (1969) Part I, Table 2.21 (public domain); cross-checked against FreeCAD CAM thread tables (LGPL-2.1+) — 1064 checks passed at 0.0001 in

### Formulas

**Tap drill hole diameter, inch threads**

```text
hole Ø  =  D − (%thread ÷ 100) × (1.29904 ÷ n)

  D = basic major diameter (in)
  n = threads per inch
```

_1.29904 = 2 × 0.64952, twice the engaged thread height per side on the 60° Unified profile._

**Actual thread engagement of the chosen drill**

```text
%thread  =  (D − drill Ø) × n ÷ 1.29904 × 100
```

_The drill column rounds to a real drill; this is the engagement that drill actually leaves._

**Tensile stress area, Unified inch threads**

```text
At  =  0.7854 × (D − 0.9743 ÷ n)²
```

_ASME B1.1 / NBS H28 form. Reproduces the stored value exactly for this thread._

### Assumptions

- The headline tap drill assumes 75% thread engagement, the general shop default. Every engagement from 50% to 85% is in the tap drill table — change the assumption and the number moves.
- Tap drill figures are for cut taps. Drill diameters are nominal; a worn or run-out drill cuts oversize and reduces engagement further.
- Tapped-hole figures assume a class 2B internal thread, the general-purpose fit.
- Dataset scope: Le = 1D for UNC/UNF, 9P for UNEF — determined empirically against H28 Table 2.21, resolving data-sourcing.md open item 5. EXCLUDED: form (roll) tap drills, class 1A/1B limits, class 1AR allowances, constant-pitch UN series.

**Data last verified**: August 1, 2026

## Common Questions About 11/16"-24 UNEF

### What is the tap drill size for 11/16"-24 UNEF?

The tap drill for 11/16"-24 UNEF is 41/64 — 0.6406 in (16.272 mm). That leaves 86.6% thread engagement with a cut tap.

### What is the pitch diameter of 11/16"-24 UNEF?

The basic pitch diameter of 11/16"-24 UNEF is 0.6604 in (16.774 mm). For a class 2B thread it runs 0.6604 in (16.774 mm) to 0.6657 in (16.909 mm).

### What is the minor diameter of 11/16"-24 UNEF?

The basic minor diameter of 11/16"-24 UNEF is 0.6424 in (16.317 mm). That is the theoretical root of the internal thread, not the drilled hole size — see the tap drill table for the hole to drill.

### What is the thread pitch of 11/16"-24 UNEF?

11/16"-24 UNEF has 24 threads per inch, a pitch of 0.0417 in (1.058 mm).

### What is the tensile stress area of 11/16"-24 UNEF?

The tensile stress area of 11/16"-24 UNEF is 0.32868 in² (212.05 mm²). Multiply it by the fastener material's allowable stress to get a load.

## Related pages

- Smaller in Unified Extra Fine (UNEF): [5/8"-24 UNEF](https://shopmath.org/threads/unef/5-8-24.md) — tap drill 37/64
- Larger in Unified Extra Fine (UNEF): [3/4"-20 UNEF](https://shopmath.org/threads/unef/3-4-20.md) — tap drill 45/64
- All Unified Extra Fine (UNEF) sizes: [Unified Extra Fine (UNEF) thread chart](https://shopmath.org/threads/unef.md)
- Every thread series: [Screw thread reference](https://shopmath.org/threads.md)
- Cross-series chart: [Tap drill chart](https://shopmath.org/charts/tap-drill.md)

---

*Source: [ShopMath](https://shopmath.org/threads/unef/11-16-24) — data verified August 1, 2026. Reference data; verify against the governing standard before manufacture.*