---
type: "thread"
name: "15/16\"-20 UNEF"
designation: "15/16-20 UNEF"
series: "unef"
series_name: "Unified Extra Fine (UNEF)"
system: "unified"
size_label: "15/16"
tpi: 20
pitch_in: 0.05
pitch_mm: 1.27
basic_major_dia_in: 0.9375
basic_major_dia_mm: 23.8125
basic_pitch_dia_in: 0.905
basic_pitch_dia_mm: 22.987
basic_minor_dia_in: 0.8834
basic_minor_dia_mm: 22.4384
tap_drill: "57/64"
tap_drill_dia_in: 0.890625
tap_drill_dia_mm: 22.6219
tap_drill_thread_pct: 72.2
tensile_stress_area_sqin: 0.620418
tensile_stress_area_sqmm: 400.269
internal_class_assumed: "2B"
standard: "ASME B1.1 (reference values based on the ASME B1.1 system; not a compliance claim)"
verified: "August 1, 2026"
url: https://shopmath.org/threads/unef/15-16-20
---

# 15/16"-20 UNEF Thread — Dimensions, Tap Drill & Clearance

The tap drill for 15/16"-20 UNEF is 57/64 — 0.8906 in (22.622 mm) — which leaves 72.2% thread engagement with a cut tap. Basic pitch diameter is 0.9050 in (22.987 mm) and basic minor diameter is 0.8834 in (22.438 mm). Tapped-hole figures on this page assume a class 2B thread; drill sizes for 50–85% engagement are in the tap drill table below.

- **Series**: Unified Extra Fine (UNEF)
- **Designation**: 15/16-20 UNEF
- **Threads per inch**: 20
- **Tap drill**: 57/64
- **Standard**: ASME B1.1 (reference values based on the ASME B1.1 system; not a compliance claim)

## Basic Thread Dimensions for 15/16"-20 UNEF

| Property | Inch | Millimetre |
| --- | --- | --- |
| Basic major diameter | 0.9375 | 23.813 |
| Threads per inch | 20 | — |
| Pitch | 0.0500 | 1.270 |
| Basic pitch diameter | 0.9050 | 22.987 |
| Basic minor diameter | 0.8834 | 22.438 |
| External thread root diameter | 0.8780 | 22.301 |
| Sharp V thread height (H) | 0.0433 | 1.100 |

_Basic dimensions are the theoretical values before any tolerance class is applied._

## Tap Drill Sizes for 15/16"-20 UNEF

Cut taps, from 50% to 85% thread engagement. The shop default is 75% — a 57/64 drill.

| Thread % | Target hole Ø (in) | Target hole Ø (mm) | Drill | Drill Ø (in) | Drill Ø (mm) | Actual thread % |
| --- | --- | --- | --- | --- | --- | --- |
| 50% | 0.9050 | 22.987 | 29/32 | 0.9063 | 23.019 | 48.1 |
| 60% | 0.8985 | 22.822 | 29/32 | 0.9063 | 23.019 | 48.1 |
| 65% | 0.8953 | 22.741 | 57/64 | 0.8906 | 22.622 | 72.2 |
| 70% | 0.8920 | 22.657 | 57/64 | 0.8906 | 22.622 | 72.2 |
| 75% (default) | 0.8888 | 22.576 | 57/64 | 0.8906 | 22.622 | 72.2 |
| 80% | 0.8855 | 22.492 | 57/64 | 0.8906 | 22.622 | 72.2 |
| 85% | 0.8823 | 22.410 | 7/8 | 0.8750 | 22.225 | 96.2 |

_Target hole Ø is the theoretical hole for the stated engagement. The drill column is the nearest size in the standard number/letter/fractional/metric index, and actual thread % is what that real drill produces._

## Thread Class Limits for 15/16"-20 UNEF

Manufacturing limits for classes 2B, 3B, 2A, 3A. A gauge reading outside these bands is a reject, not a judgement call.

### External thread (bolt / screw) limits

| Limit | Class 2A (in) | Class 2A (mm) | Class 3A (in) | Class 3A (mm) |
| --- | --- | --- | --- | --- |
| Major Ø max | 0.9361 | 23.777 | 0.9375 | 23.813 |
| Major Ø min | 0.9280 | 23.571 | 0.9294 | 23.607 |
| Pitch Ø max | 0.9037 | 22.954 | 0.9050 | 22.987 |
| Pitch Ø min | 0.8992 | 22.840 | 0.9016 | 22.901 |
| Pitch Ø tolerance | 0.0045 | 0.114 | 0.0034 | 0.086 |
| Minor Ø max | 0.8712 | 22.128 | 0.8725 | 22.162 |
| Minor Ø min | 0.8667 | 22.014 | 0.8692 | 22.078 |
| Allowance | 0.0014 | 0.036 | 0.0000 | 0.000 |

### Internal thread (nut / tapped hole) limits

| Limit | Class 2B (in) | Class 2B (mm) | Class 3B (in) | Class 3B (mm) |
| --- | --- | --- | --- | --- |
| Major Ø max | 0.9506 | 24.145 | 0.9491 | 24.107 |
| Major Ø min | 0.9375 | 23.813 | 0.9375 | 23.813 |
| Pitch Ø max | 0.9109 | 23.137 | 0.9094 | 23.099 |
| Pitch Ø min | 0.9050 | 22.987 | 0.9050 | 22.987 |
| Pitch Ø tolerance | 0.0059 | 0.150 | 0.0044 | 0.112 |
| Minor Ø max | 0.8949 | 22.730 | 0.8911 | 22.634 |
| Minor Ø min | 0.8834 | 22.438 | 0.8834 | 22.438 |
| Allowance | 0.0000 | 0.000 | 0.0000 | 0.000 |

## Tensile Stress Area of 15/16"-20 UNEF

| Property | in² | mm² |
| --- | --- | --- |
| Tensile stress area | 0.62042 | 400.27 |

The effective cross-section used to size a 15/16"-20 UNEF fastener against a load. Multiply it by the material's allowable stress — the area itself carries no strength assumption.

## Sources and Method for 15/16"-20 UNEF

### Basic dimensions

- **Source**: NBS Handbook H28 (1969) Part I §§6-7 (public domain, 17 U.S.C. 105); normative modern reference ASME B1.1; series membership: Series membership: threadlib UIS_thread.csv (BSD-3-Clause); cross-checked against NBS H28 (1969) Part I Table 2.21; clearance holes: ISO 273 (metric) and ASME B18.2.8 (inch) via FreeCAD FeatureHole.cpp (LGPL-2.1+), cross-checked against bd_warehouse clearance_hole_sizes.csv (Apache-2.0)
- **Method**: computed
- **Verified against**: NBS H28 (1969) Part I, Table 2.21 (public domain); cross-checked against FreeCAD CAM thread tables (LGPL-2.1+) — 1064 checks passed at 0.0001 in

### Tap drill sizes

- **Source**: Machinery's Handbook %-thread formula (geometry-derived); nearest-standard-drill-to-75% rule verified at 36/39 published chart rows in docs/research/data-sourcing.md §3.4
- **Method**: computed
- **Verified against**: Wikipedia Unified Thread Standard, preferred cutting tap drill size columns (CC BY-SA 4.0) — 36/39 published UNC+UNF rows reproduced

### Class limits

- **Source**: NBS Handbook H28 (1969) Part I §§6-7 (public domain, 17 U.S.C. 105); normative modern reference ASME B1.1
- **Method**: computed
- **Verified against**: NBS H28 (1969) Part I, Table 2.21 (public domain); cross-checked against FreeCAD CAM thread tables (LGPL-2.1+) — 1064 checks passed at 0.0001 in

### Formulas

**Tap drill hole diameter, inch threads**

```text
hole Ø  =  D − (%thread ÷ 100) × (1.29904 ÷ n)

  D = basic major diameter (in)
  n = threads per inch
```

_1.29904 = 2 × 0.64952, twice the engaged thread height per side on the 60° Unified profile._

**Actual thread engagement of the chosen drill**

```text
%thread  =  (D − drill Ø) × n ÷ 1.29904 × 100
```

_The drill column rounds to a real drill; this is the engagement that drill actually leaves._

**Tensile stress area, Unified inch threads**

```text
At  =  0.7854 × (D − 0.9743 ÷ n)²
```

_ASME B1.1 / NBS H28 form. Reproduces the stored value exactly for this thread._

### Assumptions

- The headline tap drill assumes 75% thread engagement, the general shop default. Every engagement from 50% to 85% is in the tap drill table — change the assumption and the number moves.
- Tap drill figures are for cut taps. Drill diameters are nominal; a worn or run-out drill cuts oversize and reduces engagement further.
- Tapped-hole figures assume a class 2B internal thread, the general-purpose fit.
- Dataset scope: Le = 1D for UNC/UNF, 9P for UNEF — determined empirically against H28 Table 2.21, resolving data-sourcing.md open item 5. EXCLUDED: form (roll) tap drills, class 1A/1B limits, class 1AR allowances, constant-pitch UN series.

**Data last verified**: August 1, 2026

## Common Questions About 15/16"-20 UNEF

### What is the tap drill size for 15/16"-20 UNEF?

The tap drill for 15/16"-20 UNEF is 57/64 — 0.8906 in (22.622 mm). That leaves 72.2% thread engagement with a cut tap.

### What is the pitch diameter of 15/16"-20 UNEF?

The basic pitch diameter of 15/16"-20 UNEF is 0.9050 in (22.987 mm). For a class 2B thread it runs 0.9050 in (22.987 mm) to 0.9109 in (23.137 mm).

### What is the minor diameter of 15/16"-20 UNEF?

The basic minor diameter of 15/16"-20 UNEF is 0.8834 in (22.438 mm). That is the theoretical root of the internal thread, not the drilled hole size — see the tap drill table for the hole to drill.

### What is the thread pitch of 15/16"-20 UNEF?

15/16"-20 UNEF has 20 threads per inch, a pitch of 0.0500 in (1.270 mm).

### What is the tensile stress area of 15/16"-20 UNEF?

The tensile stress area of 15/16"-20 UNEF is 0.62042 in² (400.27 mm²). Multiply it by the fastener material's allowable stress to get a load.

## Related pages

- Smaller in Unified Extra Fine (UNEF): [7/8"-20 UNEF](https://shopmath.org/threads/unef/7-8-20.md) — tap drill 53/64
- Larger in Unified Extra Fine (UNEF): [1"-20 UNEF](https://shopmath.org/threads/unef/1-20.md) — tap drill 61/64
- All Unified Extra Fine (UNEF) sizes: [Unified Extra Fine (UNEF) thread chart](https://shopmath.org/threads/unef.md)
- Every thread series: [Screw thread reference](https://shopmath.org/threads.md)
- Cross-series chart: [Tap drill chart](https://shopmath.org/charts/tap-drill.md)

---

*Source: [ShopMath](https://shopmath.org/threads/unef/15-16-20) — data verified August 1, 2026. Reference data; verify against the governing standard before manufacture.*