What size is a 1/64" drill bit?

A 1/64" drill bit is 0.0156 in in diameter, which is 0.397 mm. It is the 1/64 in fractional size.

What is the metric equivalent of a 1/64" drill bit?

The closest metric drill to a 1/64" drill bit (0.397 mm) is 0.4 mm, which is 0.400 mm — 0.0001 in larger.

Fractional drill · 1/64

1/64" Drill Bit Size — Decimal Inch, Millimetre and Tap Sizes

https://shopmath.org/drills/fractional/1-64 · data verified August 1, 2026

A 1/64" drill bit is 0.0156 in (0.397 mm) in diameter. Diameters are nominal.

Series: Fractional
Designation: 1/64
Inch: 0.0156
mm: 0.397
Standard: ANSI/ASME B94.11M

Fractional Drill · 1/64 · nominal diameter

0.0156 in

Millimetre: 0.397mm
Fraction: 1/64in

Nominal diameter. A worn or run-out drill cuts oversize, which leaves less thread in a tapped hole than the table says.

1/64" Drill Bit Size in Inches and Millimetres

The nominal diameter of a 1/64" drill bit. Drill sizes are nominal — a worn drill, run-out or a soft material that closes in behind the cut all move the finished hole.

1/64" drill bit — decimal inch and millimetre diameter
Property	Value
Diameter, decimal inch	0.0156 in
Diameter, millimetre	0.397 mm
Fraction	1/64 in
Cross-sectional area	0.00019 in²

1 in = 25.4 mm exactly, so the two columns are the same value in different units, not two measurements.

1/64" Drill Bit Equivalents in Every Other Drill Series

The closest size to the 1/64" drill bit in each of the other three indexes, with the difference in inches. None of them is the same drill — check the difference before substituting one into a tapped hole.

Nearest number, letter, fractional and metric equivalents to a 1/64" drill bit
Property	Property	Diameter		Property
Drill	Series	in	mm	Difference, in
#78	Number	0.0160	0.406	+0.0004
A	Letter	0.2340	5.944	+0.2184
0.4 mm	Metric	0.0157	0.400	+0.0001

A positive difference means the equivalent drill is larger, which leaves less thread in a tapped hole. Sizes without a link are stored for the nearest-drill calculation but do not carry their own page.

Drill Sizes Either Side of the 1/64" Drill Bit

Ordered by diameter across all four indexes, so the next size up may be a letter, a fraction or a metric drill rather than the next one in this series.

Standard drill sizes adjacent to a 1/64" drill bit, by diameter
Property	Property	Diameter
Drill	Series	in	mm
0.35 mm	Metric	0.0138	0.350
0.38 mm	Metric	0.0150	0.380
1/64"	Fractional	0.0156	0.397
0.4 mm	Metric	0.0157	0.400
0.42 mm	Metric	0.0165	0.420

Sources and Method for the 1/64" Drill Bit Size

Drill diametercomputed

Number/letter: bd_warehouse drill_sizes.csv (Apache-2.0) cross-checked against Wikipedia Drill bit sizes (CC BY-SA 4.0). Fractional: computed 1/64 in steps per ANSI B94.11M. Metric: computed BS 328 increment pattern.

Verified against Wikipedia Drill bit sizes (CC BY-SA 4.0); 31/31 checks passed

Computed from the standard's formulas, then checked against published tables.

Formula

Fractional drill diameter

Ø  =  1/64 in  =  0.0156 in

Fractional drills are exact fractions of an inch in 1/64 in steps; the decimal is the fraction evaluated, not a measurement.

Assumptions

Diameters are nominal. Drill manufacturing tolerance, wear and run-out all cut oversize, and every one of those moves a tapped hole toward less thread than the table says.
Dataset scope: Number sizes #61-#80 are stored but tagged demandTier 'extended' — query-space-map.md Appendix A found the tail thinning in the 60s. Sizes below #80 and metric sizes above 25.0 mm excluded.

Data last verified

August 1, 2026

How this data is built and checked →

How to Cite This 1/64" Drill Bit Reference

Citation

ShopMath. "1/64" Drill Bit Size — Decimal Inch, Millimetre and Tap Sizes." ShopMath, verified August 1, 2026, https://shopmath.org/drills/fractional/1-64

BibTeX

@misc{shopmath-drills-fractional-1-64,
  title        = {1/64" Drill Bit Size — Decimal Inch, Millimetre and Tap Sizes},
  author       = {{ShopMath}},
  year         = {2026},
  howpublished = {\url{https://shopmath.org/drills/fractional/1-64}},
  note         = {Data verified 2026-08-01}
}

Permanent URL

https://shopmath.org/drills/fractional/1-64

Common Questions About the 1/64" Drill Bit

What size is a 1/64" drill bit?: A 1/64" drill bit is 0.0156 in in diameter, which is 0.397 mm. It is the 1/64 in fractional size.
What is the metric equivalent of a 1/64" drill bit?: The closest metric drill to a 1/64" drill bit (0.397 mm) is 0.4 mm, which is 0.400 mm — 0.0001 in larger.

All fractional drill sizes · Complete drill size chart · Every drill series