How thick is 32 gauge U.S. Standard?

32 gauge U.S. Standard is 0.0102 in thick, which is 0.258 mm. A square foot weighs 0.41 lb (1.98 kg/m²).

What is 32 gauge U.S. Standard in mm?

0.258 mm. The gauge number is an index into the USG system rather than a measurement, so it converts to a fixed thickness rather than a round metric figure.

Is 32 gauge U.S. Standard thicker than 31 gauge?

No — a lower gauge number is thicker sheet. 31 gauge us standard is 0.0109 in (0.278 mm) against 0.0102 in (0.258 mm) for 32 gauge U.S. Standard, a difference of 0.0007 in.

Why is 32 gauge a different thickness in other materials?

Because each material is indexed on its own gauge system. At 32 gauge: Aluminium 0.0080 in (B&S), Galvanized 0.0135 in (galvanized-MSG), Steel 0.0097 in (MSG), US Standard 0.0102 in (USG). The number is a position in a series, not a thickness, so 3 other readings of "32 gauge" are all equally correct.

Sheet metal · U.S. Standard Gauge · USG

32 Gauge U.S. Standard Thickness in Inches and Millimetres

https://shopmath.org/gauges/us-standard/32 · data verified August 1, 2026

32 gauge U.S. Standard sheet is 0.0102 in thick — 0.258 mm. A square foot weighs 0.41 lb (1.98 kg/m²). The gauge number indexes the USG system, so the same number is a different thickness in another material — the comparison is below. Thicknesses are nominal, before mill tolerance.

Gauge: 32 ga
Material: U.S. Standard Gauge
Inch: 0.0102
mm: 0.258
System: USG

32 Gauge U.S. Standard · nominal thickness

0.0102 in

Millimetre: 0.258mm
Weight: 0.41lb/ft²
Weight: 1.98kg/m²

Nominal thickness on the USG system. Gauge numbers are material-specific — "32 gauge" on its own does not name a thickness.

32 Gauge U.S. Standard Sheet Thickness

32 Gauge U.S. Standard is defined by the 15 U.S.C. 206 (wrought iron basis), not by a measurement — the gauge number is an index into that system, which is why the same number means a different thickness in another material.

32 Gauge U.S. Standard — thickness and weight
Property	Value
Thickness, decimal inch	0.0102 in
Thickness, millimetre	0.258 mm
Weight per square foot	0.41 lb/ft²
Weight per square metre	1.98 kg/m²
Gauge system	USG

Nominal thickness. Mill tolerance on sheet is typically a few thousandths of an inch either way and varies with width and process; measure the stock when the fit matters.

32 Gauge Thickness in Every Other Sheet Material

Gauge 32 spans 0.0080 in to 0.0135 in depending on the material, because each material is indexed on a different gauge system. Ordering sheet by gauge without naming the material is how the wrong thickness arrives.

Thickness of 32 gauge sheet across materials
Property	Property	Thickness
Material	Gauge system	in	mm
Sheet Aluminium	B&S	0.0080	0.202
Galvanized Steel	galvanized-MSG	0.0135	0.342
Sheet Steel	MSG	0.0097	0.247
U.S. Standard Gauge	USG	0.0102	0.258

Steel uses the Manufacturers' Standard Gauge, galvanised adds a zinc-coating allowance to the steel thickness, aluminium and other non-ferrous sheet use the Brown & Sharpe geometric series, and U.S. Standard is the 1893 statute on a wrought-iron basis.

Gauges Either Side of 32 Gauge U.S. Standard

A higher gauge number is thinner sheet. The steps are not equal — the gauge systems are geometric, so the difference between two gauges shrinks as the sheet gets thinner.

U.S. Standard Gauge gauges adjacent to 32 gauge
Property	Thickness
Gauge	in	mm
30 ga	0.0125	0.318
31 ga	0.0109	0.278
32 ga	0.0102	0.258
33 ga	0.0094	0.238
34 ga	0.0086	0.218

Sources and Method for 32 Gauge U.S. Standard Thickness

32 Gauge U.S. Standard thicknesscomputed

15 U.S.C. 206 (Act of Mar. 3, 1893, ch. 221, 27 Stat. 746) — U.S. Standard Gauge for sheet and plate iron and steel; 15 U.S.C. 206 statutory weights; MSG (41.82 lb/ft2 per inch), galvanized zinc allowance, and Brown & Sharpe formula per docs/research/data-sourcing.md §3.7

Verified against Wikipedia Sheet metal, Standard sheet metal gauges table (CC BY-SA 4.0) — 137/137 checks passed at 0.05 mil

Computed from the standard's formulas, then checked against published tables.

Formula

Weight per square foot, sheet steel

lb/ft²  =  thickness (in) × 41.82

  0.0102 × 41.82  =  0.41 lb/ft²

41.82 lb/ft² per inch of thickness is the Manufacturers' Standard Gauge basis for steel. The U.S. Standard Gauge of 1893 uses a wrought-iron basis of 40 lb/ft² per inch, which is why the two systems differ.

Assumptions

Thicknesses are nominal. Mill tolerance varies with width, process and material and is not part of the gauge definition.
Gauge is an index into a material-specific system, not a unit. A gauge number without a material is ambiguous by construction.
Dataset scope: EXCLUDED: stainless steel (genuinely ambiguous convention, only one source in hand), zinc, copper, brass, steel tube wall.

Data last verified

August 1, 2026

How this data is built and checked →

How to Cite This 32 Gauge U.S. Standard Reference

Citation

ShopMath. "32 Gauge U.S. Standard Thickness in Inches and Millimetres." ShopMath, verified August 1, 2026, https://shopmath.org/gauges/us-standard/32

BibTeX

@misc{shopmath-gauges-us-standard-32,
  title        = {32 Gauge U.S. Standard Thickness in Inches and Millimetres},
  author       = {{ShopMath}},
  year         = {2026},
  howpublished = {\url{https://shopmath.org/gauges/us-standard/32}},
  note         = {Data verified 2026-08-01}
}

Permanent URL

https://shopmath.org/gauges/us-standard/32

Common Questions About 32 Gauge U.S. Standard

How thick is 32 gauge U.S. Standard?: 32 gauge U.S. Standard is 0.0102 in thick, which is 0.258 mm. A square foot weighs 0.41 lb (1.98 kg/m²).
What is 32 gauge U.S. Standard in mm?: 0.258 mm. The gauge number is an index into the USG system rather than a measurement, so it converts to a fixed thickness rather than a round metric figure.
Is 32 gauge U.S. Standard thicker than 31 gauge?: No — a lower gauge number is thicker sheet. 31 gauge us standard is 0.0109 in (0.278 mm) against 0.0102 in (0.258 mm) for 32 gauge U.S. Standard, a difference of 0.0007 in.
Why is 32 gauge a different thickness in other materials?: Because each material is indexed on its own gauge system. At 32 gauge: Aluminium 0.0080 in (B&S), Galvanized 0.0135 in (galvanized-MSG), Steel 0.0097 in (MSG), US Standard 0.0102 in (USG). The number is a position in a series, not a thickness, so 3 other readings of "32 gauge" are all equally correct.

All 45 us standard gauges · Sheet metal gauge chart · Every gauge system