Unified Coarse (UNC) · 1 3/4-5 UNC
1 3/4"-5 UNC Thread — Dimensions, Tap Drill & Clearance
https://shopmath.org/threads/unc/1-3-4-5 · data verified August 1, 2026
The tap drill for 1 3/4"-5 UNC is 1 — 1.0000 in (25.400 mm) — which leaves 288.7% thread engagement with a cut tap. Basic pitch diameter is 1.6201 in (41.151 mm) and basic minor diameter is 1.5335 in (38.951 mm). Tapped-hole figures on this page assume a class 2B thread; drill sizes for 50–85% engagement are in the tap drill table below.
- Series
- Unified Coarse (UNC)
- Designation
- 1 3/4-5 UNC
- TPI
- 5
- Standard
- ASME B1.1
Tap drill · 288.7% thread · cut tap
1
- Drill Ø
- 1.0000in
- Drill Ø
- 25.400mm
Assumes 75% thread engagement with a cut tap and a class 2B hole. That drill actually leaves 288.7% thread.
Basic Thread Dimensions for 1 3/4"-5 UNC
| Property | Inch | Millimetre |
|---|---|---|
| Basic major diameter | 1.7500 | 44.450 |
| Threads per inch | 5 | — |
| Pitch | 0.2000 | 5.080 |
| Basic pitch diameter | 1.6201 | 41.151 |
| Basic minor diameter | 1.5335 | 38.951 |
| External thread root diameter | 1.5118 | 38.400 |
| Sharp V thread height (H) | 0.1732 | 4.399 |
Threads per inch has no millimetre counterpart — metric threads are specified by pitch instead. Basic dimensions are the theoretical values before any tolerance class is applied.
Tap Drill Sizes for 1 3/4"-5 UNC
Cut taps, from 50% to 85% thread engagement. The shop default is 75% — a 1 drill. Deeper engagement means more holding strength and more torque on the tap.
| Property | Target hole Ø | Nearest standard drill | Property | |||
|---|---|---|---|---|---|---|
| Thread % | in | mm | Drill | in | mm | Actual thread % |
| 50% | 1.6201 | 41.151 | 1 | 1.0000 | 25.400 | 288.7 |
| 60% | 1.5941 | 40.490 | 1 | 1.0000 | 25.400 | 288.7 |
| 65% | 1.5811 | 40.160 | 1 | 1.0000 | 25.400 | 288.7 |
| 70% | 1.5681 | 39.830 | 1 | 1.0000 | 25.400 | 288.7 |
| 75%default | 1.5551 | 39.499 | 1 | 1.0000 | 25.400 | 288.7 |
| 80% | 1.5422 | 39.172 | 1 | 1.0000 | 25.400 | 288.7 |
| 85% | 1.5292 | 38.842 | 1 | 1.0000 | 25.400 | 288.7 |
Target hole Ø is the theoretical hole for the stated engagement. The drill column is the nearest size in the standard number/letter/fractional/metric index, and actual thread % is what that real drill produces — the number that matters at the machine. Values are for cut taps. Tapped-hole figures assume a class 2B hole.
Thread Class Limits for 1 3/4"-5 UNC
Manufacturing limits for classes 2B, 3B, 2A, 3A. A gauge reading outside these bands is a reject, not a judgement call.
| Property | Class 2A | Class 3A | ||
|---|---|---|---|---|
| Limit | in | mm | in | mm |
| Major Ø max | 1.7473 | 44.381 | 1.7500 | 44.450 |
| Major Ø min | 1.7268 | 43.861 | 1.7295 | 43.929 |
| Pitch Ø max | 1.6174 | 41.082 | 1.6201 | 41.151 |
| Pitch Ø min | 1.6085 | 40.856 | 1.6134 | 40.980 |
| Pitch Ø tolerance | 0.0089 | 0.226 | 0.0067 | 0.170 |
| Minor Ø max | 1.4875 | 37.782 | 1.4902 | 37.851 |
| Minor Ø min | 1.4786 | 37.556 | 1.4835 | 37.681 |
| Allowance | 0.0027 | 0.069 | 0.0000 | 0.000 |
| Property | Class 2B | Class 3B | ||
|---|---|---|---|---|
| Limit | in | mm | in | mm |
| Major Ø max | 1.7905 | 45.479 | 1.7876 | 45.405 |
| Major Ø min | 1.7500 | 44.450 | 1.7500 | 44.450 |
| Pitch Ø max | 1.6317 | 41.445 | 1.6288 | 41.371 |
| Pitch Ø min | 1.6201 | 41.151 | 1.6201 | 41.151 |
| Pitch Ø tolerance | 0.0116 | 0.295 | 0.0087 | 0.221 |
| Minor Ø max | 1.5675 | 39.815 | 1.5575 | 39.560 |
| Minor Ø min | 1.5335 | 38.951 | 1.5335 | 38.951 |
| Allowance | 0.0000 | 0.000 | 0.0000 | 0.000 |
Tensile Stress Area of 1 3/4"-5 UNC
The effective cross-section used to size a 1 3/4"-5 UNC fastener against a load. Multiply it by the material's allowable stress — the area itself carries no strength assumption.
| Property | in² | mm² |
|---|---|---|
| Tensile stress area | 1.89946 | 1225.45 |
The formula this value comes from is in the sources section below.
Sources and Method for 1 3/4"-5 UNC
- Basic dimensionscomputed
NBS Handbook H28 (1969) Part I §§6-7 (public domain, 17 U.S.C. 105); normative modern reference ASME B1.1; series membership: Series membership: threadlib UIS_thread.csv (BSD-3-Clause); cross-checked against NBS H28 (1969) Part I Table 2.21; clearance holes: ISO 273 (metric) and ASME B18.2.8 (inch) via FreeCAD FeatureHole.cpp (LGPL-2.1+), cross-checked against bd_warehouse clearance_hole_sizes.csv (Apache-2.0)
Verified against NBS H28 (1969) Part I, Table 2.21 (public domain); cross-checked against FreeCAD CAM thread tables (LGPL-2.1+) — 1064 checks passed at 0.0001 in
Computed from the standard's formulas, then checked against published tables.
- Tap drill sizescomputed
Machinery's Handbook %-thread formula (geometry-derived); nearest-standard-drill-to-75% rule verified at 36/39 published chart rows in docs/research/data-sourcing.md §3.4
Verified against Wikipedia Unified Thread Standard, preferred cutting tap drill size columns (CC BY-SA 4.0) — 36/39 published UNC+UNF rows reproduced
Computed from the standard's formulas, then checked against published tables.
- Class limitscomputed
NBS Handbook H28 (1969) Part I §§6-7 (public domain, 17 U.S.C. 105); normative modern reference ASME B1.1
Verified against NBS H28 (1969) Part I, Table 2.21 (public domain); cross-checked against FreeCAD CAM thread tables (LGPL-2.1+) — 1064 checks passed at 0.0001 in
Computed from the standard's formulas, then checked against published tables.
- Formula
Tap drill hole diameter, inch threads
hole Ø = D − (%thread ÷ 100) × (1.29904 ÷ n) D = basic major diameter (in) n = threads per inch
1.29904 = 2 × 0.64952, twice the engaged thread height per side on the 60° Unified profile.
Actual thread engagement of the chosen drill
%thread = (D − drill Ø) × n ÷ 1.29904 × 100
The drill column rounds to a real drill; this is the engagement that drill actually leaves.
Tensile stress area, Unified inch threads
At = 0.7854 × (D − 0.9743 ÷ n)²
ASME B1.1 / NBS H28 form. Reproduces the stored value exactly for this thread.
- Assumptions
- The headline tap drill assumes 75% thread engagement, the general shop default. Every other engagement from 50% to 85% is in the tap drill table — change the assumption and the number moves.
- Tap drill figures are for cut taps. Drill diameters are nominal; a worn or run-out drill cuts oversize and reduces engagement further.
- Tapped-hole figures assume a class 2B internal thread, the general-purpose fit.
- Dataset scope: Le = 1D for UNC/UNF, 9P for UNEF — determined empirically against H28 Table 2.21, resolving data-sourcing.md open item 5. EXCLUDED: form (roll) tap drills, class 1A/1B limits, class 1AR allowances, constant-pitch UN series.
- Data last verified
- August 1, 2026
How to Cite This 1 3/4"-5 UNC Reference
Citation
ShopMath. "1 3/4"-5 UNC Thread — Dimensions, Tap Drill & Clearance." ShopMath, verified August 1, 2026, https://shopmath.org/threads/unc/1-3-4-5
BibTeX
@misc{shopmath-threads-unc-1-3-4-5,
title = {1 3/4"-5 UNC Thread — Dimensions, Tap Drill & Clearance},
author = {{ShopMath}},
year = {2026},
howpublished = {\url{https://shopmath.org/threads/unc/1-3-4-5}},
note = {Data verified 2026-08-01}
}Permanent URL
https://shopmath.org/threads/unc/1-3-4-5
Common Questions About 1 3/4"-5 UNC
What is the tap drill size for 1 3/4"-5 UNC?
- The tap drill for 1 3/4"-5 UNC is 1 — 1.0000 in (25.400 mm). That leaves 288.7% thread engagement with a cut tap.
What is the pitch diameter of 1 3/4"-5 UNC?
- The basic pitch diameter of 1 3/4"-5 UNC is 1.6201 in (41.151 mm). For a class 2B thread it runs 1.6201 in (41.151 mm) to 1.6317 in (41.445 mm).
What is the minor diameter of 1 3/4"-5 UNC?
- The basic minor diameter of 1 3/4"-5 UNC is 1.5335 in (38.951 mm). That is the theoretical root of the internal thread, not the drilled hole size — see the tap drill table for the hole to drill.
What is the thread pitch of 1 3/4"-5 UNC?
- 1 3/4"-5 UNC has 5 threads per inch, a pitch of 0.2000 in (5.080 mm).
What is the tensile stress area of 1 3/4"-5 UNC?
- The tensile stress area of 1 3/4"-5 UNC is 1.89946 in² (1225.45 mm²). Multiply it by the fastener material's allowable stress to get a load.