Fractional drill · 61/64
61/64" Drill Bit Size — Decimal Inch, Millimetre and Tap Sizes
https://shopmath.org/drills/fractional/61-64 · data verified August 1, 2026
A 61/64" drill bit is 0.9531 in (24.209 mm) in diameter. It is the tap drill for 1"-20 UNEF at 75% thread engagement with a cut tap, where it leaves 72.2% thread. Diameters are nominal.
- Series
- Fractional
- Designation
- 61/64
- Inch
- 0.9531
- mm
- 24.209
- Standard
- ANSI/ASME B94.11M
Fractional Drill · 61/64 · nominal diameter
0.9531 in
- Millimetre
- 24.209mm
- Fraction
- 61/64in
- Taps
- 1"-20 UNEF
Nominal diameter. As a tap drill it leaves 72.2% thread in 1"-20 UNEF with a cut tap.
61/64" Drill Bit Size in Inches and Millimetres
The nominal diameter of a 61/64" drill bit. Drill sizes are nominal — a worn drill, run-out or a soft material that closes in behind the cut all move the finished hole.
| Property | Value |
|---|---|
| Diameter, decimal inch | 0.9531 in |
| Diameter, millimetre | 24.209 mm |
| Fraction | 61/64 in |
| Cross-sectional area | 0.71349 in² |
1 in = 25.4 mm exactly, so the two columns are the same value in different units, not two measurements.
Threads a 61/64" Drill Bit Taps
Every thread in this reference whose tap drill is the 61/64" drill bit, and the thread engagement it leaves. The engagement asked for and the engagement the drill actually produces are different numbers — that gap is why both columns are here.
| Thread | Series | Thread % asked for | Thread % this drill leaves |
|---|---|---|---|
| 1"-20 UNEF | Unified Extra Fine (UNEF) | 75%default | 72.2 |
| 1"-20 UNEF | Unified Extra Fine (UNEF) | 65% | 72.2 |
| 1"-20 UNEF | Unified Extra Fine (UNEF) | 70% | 72.2 |
| 1"-20 UNEF | Unified Extra Fine (UNEF) | 80% | 72.2 |
| 1"-12 UNF | Unified Fine (UNF) | 50% | 43.3 |
Values are for cut taps. Rows marked default are the shop-default engagement for that thread.
61/64" Drill Bit Equivalents in Every Other Drill Series
The closest size to the 61/64" drill bit in each of the other three indexes, with the difference in inches. None of them is the same drill — check the difference before substituting one into a tapped hole.
| Property | Property | Diameter | Property | |
|---|---|---|---|---|
| Drill | Series | in | mm | Difference, in |
| #1 | Number | 0.2280 | 5.791 | −0.7251 |
| Z | Letter | 0.4130 | 10.490 | −0.5401 |
| 24.25 mm | Metric | 0.9547 | 24.250 | +0.0016 |
A positive difference means the equivalent drill is larger, which leaves less thread in a tapped hole. Sizes without a link are stored for the nearest-drill calculation but do not carry their own page.
Drill Sizes Either Side of the 61/64" Drill Bit
Ordered by diameter across all four indexes, so the next size up may be a letter, a fraction or a metric drill rather than the next one in this series.
Sources and Method for the 61/64" Drill Bit Size
- Drill diametercomputed
Number/letter: bd_warehouse drill_sizes.csv (Apache-2.0) cross-checked against Wikipedia Drill bit sizes (CC BY-SA 4.0). Fractional: computed 1/64 in steps per ANSI B94.11M. Metric: computed BS 328 increment pattern.
Verified against Wikipedia Drill bit sizes (CC BY-SA 4.0); 31/31 checks passed
Computed from the standard's formulas, then checked against published tables.
- Tap drill usagecomputed+compiled
bd_warehouse drill_sizes.csv (Apache-2.0) + Wikipedia Drill bit sizes (CC BY-SA 4.0); fractional and metric computed from ANSI B94.11M / BS 328 increment patterns
Verified against drills: 31 checks passed across 1 harness(es)
Part computed from the standard's formulas, part compiled from agreeing public sources.
- Formula
Fractional drill diameter
Ø = 61/64 in = 0.9531 in
Fractional drills are exact fractions of an inch in 1/64 in steps; the decimal is the fraction evaluated, not a measurement.
- Assumptions
- Diameters are nominal. Drill manufacturing tolerance, wear and run-out all cut oversize, and every one of those moves a tapped hole toward less thread than the table says.
- Tap drill usage assumes cut taps. 1"-20 UNEF at 75% requested engagement is what this drill is normally bought for.
- Dataset scope: Number sizes #61-#80 are stored but tagged demandTier 'extended' — query-space-map.md Appendix A found the tail thinning in the 60s. Sizes below #80 and metric sizes above 25.0 mm excluded.
- Data last verified
- August 1, 2026
How to Cite This 61/64" Drill Bit Reference
Citation
ShopMath. "61/64" Drill Bit Size — Decimal Inch, Millimetre and Tap Sizes." ShopMath, verified August 1, 2026, https://shopmath.org/drills/fractional/61-64
BibTeX
@misc{shopmath-drills-fractional-61-64,
title = {61/64" Drill Bit Size — Decimal Inch, Millimetre and Tap Sizes},
author = {{ShopMath}},
year = {2026},
howpublished = {\url{https://shopmath.org/drills/fractional/61-64}},
note = {Data verified 2026-08-01}
}Permanent URL
https://shopmath.org/drills/fractional/61-64
Common Questions About the 61/64" Drill Bit
What size is a 61/64" drill bit?
- A 61/64" drill bit is 0.9531 in in diameter, which is 24.209 mm. It is the 61/64 in fractional size.
What thread does a 61/64" drill bit tap?
- A 61/64" drill bit is the tap drill for 1"-20 UNEF at 75% requested thread engagement, where it leaves 72.2% thread with a cut tap.
What is the metric equivalent of a 61/64" drill bit?
- The closest metric drill to a 61/64" drill bit (24.209 mm) is 24.25 mm, which is 24.250 mm — 0.0016 in larger.
All fractional drill sizes · Complete drill size chart · Every drill series