What size is a #14 drill bit?

A #14 drill bit is 0.1820 in in diameter, which is 4.623 mm.

What thread does a #14 drill bit tap?

A #14 drill bit is the tap drill for #12-28 UNF at 75% requested thread engagement, where it leaves 73.3% thread with a cut tap.

What is the metric equivalent of a #14 drill bit?

The closest metric drill to a #14 drill bit (4.623 mm) is 4.6 mm, which is 4.600 mm — 0.0009 in smaller.

What fraction is a #14 drill bit closest to?

A #14 drill bit (0.1820 in) sits closest to the 3/16" fractional drill at 0.1875 in, a difference of 0.0055 in.

Number drill · #14

#14 Drill Bit Size — Decimal Inch, Millimetre and Tap Sizes

https://shopmath.org/drills/number/14 · data verified August 1, 2026

A #14 drill bit is 0.1820 in (4.623 mm) in diameter. It is the tap drill for #12-28 UNF at 75% thread engagement with a cut tap, where it leaves 73.3% thread. The nearest fractional size is 3/16" at 0.1875 in. Diameters are nominal.

Series: Number
Designation: #14
Inch: 0.1820
mm: 4.623
Standard: ANSI/ASME B94.11M

Number Drill · #14 · nominal diameter

0.1820 in

Millimetre: 4.623mm
Taps: #12-28 UNF

Nominal diameter. As a tap drill it leaves 73.3% thread in #12-28 UNF with a cut tap.

#14 Drill Bit Size in Inches and Millimetres

The nominal diameter of a #14 drill bit. Drill sizes are nominal — a worn drill, run-out or a soft material that closes in behind the cut all move the finished hole.

#14 drill bit — decimal inch and millimetre diameter
Property	Value
Diameter, decimal inch	0.1820 in
Diameter, millimetre	4.623 mm
Cross-sectional area	0.02602 in²

1 in = 25.4 mm exactly, so the two columns are the same value in different units, not two measurements.

Threads a #14 Drill Bit Taps

Every thread in this reference whose tap drill is the #14 drill bit, and the thread engagement it leaves. The engagement asked for and the engagement the drill actually produces are different numbers — that gap is why both columns are here.

Threads tapped with a #14 drill bit, by thread engagement
Thread	Series	Thread % asked for	Thread % this drill leaves
#12-28 UNF	Unified Fine (UNF)	75%default	73.3
#12-32 UNEF	Unified Extra Fine (UNEF)	85%	83.8

Values are for cut taps. Rows marked default are the shop-default engagement for that thread.

#14 Drill Bit Equivalents in Every Other Drill Series

The closest size to the #14 drill bit in each of the other three indexes, with the difference in inches. None of them is the same drill — check the difference before substituting one into a tapped hole.

Nearest number, letter, fractional and metric equivalents to a #14 drill bit
Property	Property	Diameter		Property
Drill	Series	in	mm	Difference, in
A	Letter	0.2340	5.944	+0.0520
3/16"	Fractional	0.1875	4.763	+0.0055
4.6 mm	Metric	0.1811	4.600	−0.0009

A positive difference means the equivalent drill is larger, which leaves less thread in a tapped hole. Sizes without a link are stored for the nearest-drill calculation but do not carry their own page.

Drill Sizes Either Side of the #14 Drill Bit

Ordered by diameter across all four indexes, so the next size up may be a letter, a fraction or a metric drill rather than the next one in this series.

Standard drill sizes adjacent to a #14 drill bit, by diameter
Property	Property	Diameter
Drill	Series	in	mm
#15	Number	0.1800	4.572
4.6 mm	Metric	0.1811	4.600
#14	Number	0.1820	4.623
#13	Number	0.1850	4.699
4.7 mm	Metric	0.1850	4.700

Sources and Method for the #14 Drill Bit Size

Drill diametercompiled

Number/letter: bd_warehouse drill_sizes.csv (Apache-2.0) cross-checked against Wikipedia Drill bit sizes (CC BY-SA 4.0). Fractional: computed 1/64 in steps per ANSI B94.11M. Metric: computed BS 328 increment pattern.

Verified against Wikipedia Drill bit sizes (CC BY-SA 4.0); 31/31 checks passed

Compiled from independent public sources that agree cell-for-cell.

Tap drill usagecomputed+compiled

bd_warehouse drill_sizes.csv (Apache-2.0) + Wikipedia Drill bit sizes (CC BY-SA 4.0); fractional and metric computed from ANSI B94.11M / BS 328 increment patterns

Verified against drills: 31 checks passed across 1 harness(es)

Part computed from the standard's formulas, part compiled from agreeing public sources.

Assumptions

Diameters are nominal. Drill manufacturing tolerance, wear and run-out all cut oversize, and every one of those moves a tapped hole toward less thread than the table says.
Tap drill usage assumes cut taps. #12-28 UNF at 75% requested engagement is what this drill is normally bought for.
Dataset scope: Number sizes #61-#80 are stored but tagged demandTier 'extended' — query-space-map.md Appendix A found the tail thinning in the 60s. Sizes below #80 and metric sizes above 25.0 mm excluded.

Data last verified

August 1, 2026

How this data is built and checked →

How to Cite This #14 Drill Bit Reference

Citation

ShopMath. "#14 Drill Bit Size — Decimal Inch, Millimetre and Tap Sizes." ShopMath, verified August 1, 2026, https://shopmath.org/drills/number/14

BibTeX

@misc{shopmath-drills-number-14,
  title        = {#14 Drill Bit Size — Decimal Inch, Millimetre and Tap Sizes},
  author       = {{ShopMath}},
  year         = {2026},
  howpublished = {\url{https://shopmath.org/drills/number/14}},
  note         = {Data verified 2026-08-01}
}

Permanent URL

https://shopmath.org/drills/number/14

Common Questions About the #14 Drill Bit

What size is a #14 drill bit?: A #14 drill bit is 0.1820 in in diameter, which is 4.623 mm.
What thread does a #14 drill bit tap?: A #14 drill bit is the tap drill for #12-28 UNF at 75% requested thread engagement, where it leaves 73.3% thread with a cut tap.
What is the metric equivalent of a #14 drill bit?: The closest metric drill to a #14 drill bit (4.623 mm) is 4.6 mm, which is 4.600 mm — 0.0009 in smaller.
What fraction is a #14 drill bit closest to?: A #14 drill bit (0.1820 in) sits closest to the 3/16" fractional drill at 0.1875 in, a difference of 0.0055 in.

All number drill sizes · Complete drill size chart · Every drill series