How thick is 10 gauge galvanised steel?

10 gauge galvanised steel is 0.1382 in thick, which is 3.511 mm. A square foot weighs 5.63 lb (27.46 kg/m²).

What is 10 gauge galvanised steel in mm?

3.511 mm. The gauge number is an index into the galvanized-MSG system rather than a measurement, so it converts to a fixed thickness rather than a round metric figure.

Is 10 gauge galvanised steel thicker than 9 gauge?

No — a lower gauge number is thicker sheet. 9 gauge galvanized is 0.1532 in (3.891 mm) against 0.1382 in (3.511 mm) for 10 gauge galvanised steel, a difference of 0.0150 in.

Why is 10 gauge a different thickness in other materials?

Because each material is indexed on its own gauge system. At 10 gauge: Aluminium 0.1019 in (B&S), Galvanized 0.1382 in (galvanized-MSG), Steel 0.1345 in (MSG), US Standard 0.1406 in (USG). The number is a position in a series, not a thickness, so 3 other readings of "10 gauge" are all equally correct.

Sheet metal · Galvanized Steel · galvanized-MSG

10 Gauge Galvanised Steel Thickness in Inches and Millimetres

https://shopmath.org/gauges/galvanized/10 · data verified August 1, 2026

10 gauge galvanised steel sheet is 0.1382 in thick — 3.511 mm. A square foot weighs 5.63 lb (27.46 kg/m²). The gauge number indexes the galvanized-MSG system, so the same number is a different thickness in another material — the comparison is below. Thicknesses are nominal, before mill tolerance.

Gauge: 10 ga
Material: Galvanized Steel
Inch: 0.1382
mm: 3.511
System: galvanized-MSG

10 Gauge Galvanised Steel · nominal thickness

0.1382 in

Millimetre: 3.511mm
Weight: 5.63lb/ft²
Weight: 27.46kg/m²

Nominal thickness on the galvanized-MSG system. Gauge numbers are material-specific — "10 gauge" on its own does not name a thickness.

10 Gauge Galvanised Steel Sheet Thickness

10 Gauge Galvanised Steel is defined by the MSG plus zinc coating allowance, not by a measurement — the gauge number is an index into that system, which is why the same number means a different thickness in another material.

10 Gauge Galvanised Steel — thickness and weight
Property	Value
Thickness, decimal inch	0.1382 in
Thickness, millimetre	3.511 mm
Weight per square foot	5.63 lb/ft²
Weight per square metre	27.46 kg/m²
Gauge system	galvanized-MSG

Nominal thickness. Mill tolerance on sheet is typically a few thousandths of an inch either way and varies with width and process; measure the stock when the fit matters.

10 Gauge Thickness in Every Other Sheet Material

Gauge 10 spans 0.1019 in to 0.1406 in depending on the material, because each material is indexed on a different gauge system. Ordering sheet by gauge without naming the material is how the wrong thickness arrives.

Thickness of 10 gauge sheet across materials
Property	Property	Thickness
Material	Gauge system	in	mm
Sheet Aluminium	B&S	0.1019	2.588
Galvanized Steel	galvanized-MSG	0.1382	3.511
Sheet Steel	MSG	0.1345	3.416
U.S. Standard Gauge	USG	0.1406	3.572

Steel uses the Manufacturers' Standard Gauge, galvanised adds a zinc-coating allowance to the steel thickness, aluminium and other non-ferrous sheet use the Brown & Sharpe geometric series, and U.S. Standard is the 1893 statute on a wrought-iron basis.

Gauges Either Side of 10 Gauge Galvanised Steel

A higher gauge number is thinner sheet. The steps are not equal — the gauge systems are geometric, so the difference between two gauges shrinks as the sheet gets thinner.

Galvanized Steel gauges adjacent to 10 gauge
Property	Thickness
Gauge	in	mm
9 ga	0.1532	3.891
10 ga	0.1382	3.511
11 ga	0.1233	3.132
12 ga	0.1084	2.752

Sources and Method for 10 Gauge Galvanised Steel Thickness

10 Gauge Galvanised Steel thicknesscomputed

15 U.S.C. 206 (Act of Mar. 3, 1893, ch. 221, 27 Stat. 746) — U.S. Standard Gauge for sheet and plate iron and steel; 15 U.S.C. 206 statutory weights; MSG (41.82 lb/ft2 per inch), galvanized zinc allowance, and Brown & Sharpe formula per docs/research/data-sourcing.md §3.7

Verified against Wikipedia Sheet metal, Standard sheet metal gauges table (CC BY-SA 4.0) — 137/137 checks passed at 0.05 mil

Computed from the standard's formulas, then checked against published tables.

Formula

Weight per square foot, sheet steel

lb/ft²  =  thickness (in) × 41.82

  0.1382 × 41.82  =  5.63 lb/ft²

41.82 lb/ft² per inch of thickness is the Manufacturers' Standard Gauge basis for steel. The U.S. Standard Gauge of 1893 uses a wrought-iron basis of 40 lb/ft² per inch, which is why the two systems differ.

Assumptions

Thicknesses are nominal. Mill tolerance varies with width, process and material and is not part of the gauge definition.
Gauge is an index into a material-specific system, not a unit. A gauge number without a material is ambiguous by construction.
Dataset scope: EXCLUDED: stainless steel (genuinely ambiguous convention, only one source in hand), zinc, copper, brass, steel tube wall.

Data last verified

August 1, 2026

How this data is built and checked →

How to Cite This 10 Gauge Galvanised Steel Reference

Citation

ShopMath. "10 Gauge Galvanised Steel Thickness in Inches and Millimetres." ShopMath, verified August 1, 2026, https://shopmath.org/gauges/galvanized/10

BibTeX

@misc{shopmath-gauges-galvanized-10,
  title        = {10 Gauge Galvanised Steel Thickness in Inches and Millimetres},
  author       = {{ShopMath}},
  year         = {2026},
  howpublished = {\url{https://shopmath.org/gauges/galvanized/10}},
  note         = {Data verified 2026-08-01}
}

Permanent URL

https://shopmath.org/gauges/galvanized/10

Common Questions About 10 Gauge Galvanised Steel

How thick is 10 gauge galvanised steel?: 10 gauge galvanised steel is 0.1382 in thick, which is 3.511 mm. A square foot weighs 5.63 lb (27.46 kg/m²).
What is 10 gauge galvanised steel in mm?: 3.511 mm. The gauge number is an index into the galvanized-MSG system rather than a measurement, so it converts to a fixed thickness rather than a round metric figure.
Is 10 gauge galvanised steel thicker than 9 gauge?: No — a lower gauge number is thicker sheet. 9 gauge galvanized is 0.1532 in (3.891 mm) against 0.1382 in (3.511 mm) for 10 gauge galvanised steel, a difference of 0.0150 in.
Why is 10 gauge a different thickness in other materials?: Because each material is indexed on its own gauge system. At 10 gauge: Aluminium 0.1019 in (B&S), Galvanized 0.1382 in (galvanized-MSG), Steel 0.1345 in (MSG), US Standard 0.1406 in (USG). The number is a position in a series, not a thickness, so 3 other readings of "10 gauge" are all equally correct.

All 24 galvanized gauges · Sheet metal gauge chart · Every gauge system